Thanks out to @Portia over at Sourcemore, for contacting me, and sending this unit out for review.
https://www.sourcemore.com/bd-vape-mod-rayden-100.html
TBH I had never heard of BD Vape or their product lineup, but after I saw the Rayden, I knew I had to test it. Let’s get into this little heavy hitter !!!
Specs:
- DIMENSIONS: 90mm by 34mm by 28mm
- BATTERY CONFIGURATION: Single 18650 / 21700 Battery - Not Included
- WATTAGE RANGE: 5-100W
- VOLTAGE RANGE: 1-8V
- RESISTANCE RANGE: 0.08-3.5ohm
- CHASSIS MATERIAL: Aluminum + Zinc Alloy
- DISPLAY SCREEN: 0.96" Screen
- OPERATION: Firing Button
- OUTPUT: Adjustable Wattage
- CONNECTION: Threaded 510
- CHARGING: USB Type-C (2A)
- CHIPSET: XT Ultra 1.2
- On/Off Switch
What’s Included:
- 1 Rayden 100 Mod
- 1 USB-C Cable
- 1 18650 Battery Adapter
- 1 Rayden 100 User Manual
Firing Modes:
- Wattage
- Boost (Soft, Normal, Hard)
- Bypass
Continuing, from BD Vape …
Even the box art looked impressive …
A nice, no frills monolithic vibe from the packing …
And alas, the little tugboat is revealed …
In addition to the battery sleeve adapter the extras were bare bones, with a high quality USB-C cable, and Owner’s Manual …
Scanned the Owner’s Manual, but there wasn’t much to it …
And finally, the Rayden 100 …
Personally I love/d the clean, no frills, un-flashy appearance of the Rayden. Side mounted USB-C charging on the right, and mechanical kill switch on the left. Also very nice stippled grips as well …
A generous 28mm heavy top plate …
A heavy, smooth threaded, vented bottom cap with excellent knurling …
Inside of the cap (with polarity marker) …
Closer look at the right side w./ USB-C side charging port …
Who doesn’t love an old school, no hassle kill switch …
A total look at the Mod, 18650 tube adapter, and cap …
Whenever it’s an option, I always roll with 21700’s …
No hassles, or fitment issues with the big batt …
After inserting the positive end in the tube (polarity markings inside tube), just enough overhang, which was snugged up completely when screwing the cap on. No rattles…
Initial boot with Battery Strength, Wattage, Voltage, Ohms, Boost Level, and Puff Counter, along with 3 VERY clicky buttons …
Main menu …
Different boost levels …
Theme (color) choices …
I preferred the Blue theme …
Cocked, locked, and ready to rock with a Steam Crave Supreme RDTA …
Testing/Usage:
During my testing the FIRST thing that stood out about this MOD was how solid it was, how well it felt in the hand, and how easy it was to just USE it, instead of having to fiddle with it. Built like a little tank, and with a good 21700 battery it hit like one too. The display was bright, and crisp, and the menu was super easy to set and forget. The tactile click of both the adjustment buttons, and fire button cannot be overstated. Very clean lines, well thought out side charging port, and cap knurling just made it even better. I ran dual 24 ga. kanthal verticals throughout the entire test, and 65 watts, in Hard Boost mode seemed to just work. The claimed 0.002 second fire time seemed accurate, and it was REALLY fast firing. Cap, and top plate threads were well machined, and the whole unit just felt well put together, solid, and sturdy.
Pros:
- Very well built, machined, assembled
- VERY fast firing (0.002 seconds)
- Very clicky, tactile buttons
- Easy to use menu system
- Great knurling on cap for easy removal
- On/Off switch, no need to clickity, clickity, click before putting in your pocket
- Crisp display with multiple color options
- 18650, or 21700 batteries !!!
- Two button shortcuts to reduce clicking
- Large top plate for more RTA, RDA choices with no overhang
Cons:
- Only single battery
- 5 clicking to get into Menu did fire, fire, fire, the MOD
- Display was slightly harder to read in direct sunlight (common issue)
- Manual was sparse and didn’t fully explain all details
- No temp control
With such a big list of Pro’s and very few Con’s, this one was a winner for me. I’ve got plenty of Mods that are far more advanced, but many can be a bit figgity, and have to be coddled at times. Not the Rayden. It was just a no-nonsense, set it and forget it, and enjoy it kind of MOD. Sometimes that’s just what the doctor ordered. Easy peasy, lemon squeezy here folks.
No fancy options, no temp control, anti dry hit tech here, but it just worked. Bypass mode (mech mode) worked very well, but I still preferred 65w in wattage mode with a Hard Boost. Shortcuts for locking the settings, and/or changing the display theme colors without having to 5 click into the menu to do so was a nice touch. The unit was very solid and had heft, so side charging, while standing upright was a non-issue. Knurling on the bottom cap was just another great simple touch.
I hope all of the “it only uses 18650” crowd, will take a closer look at this 21700 MOD, as it was giving me roughly 8-10 hours on a single battery charge. Pretty impressive. Boost modes that actually worked, clicky buttons, and great looks, made it hard to not like this one from BD Vape. Solid, and weighty, but felt good in the hand, and don’t forget, could be easily turned on/off via the mech kill switch before pocketing.
Having never heard of, or used any BD Vape tech until now, color me impressed. If you’re in the market for a smaller, pocket friendly, heavy hitting MOD, you should add this to your list.
Thanks again, out to @Portia at Sourcemore for sending the Rayden 100 out for this review.
https://www.sourcemore.com/bd-vape-mod-rayden-100.html
Colors:
Plenty of custom models, including a Carbon Fiber Edition …
Thank you out to the faithful. If you have indeed made it all the way down here, I salute you, and thank you. Bonuses for you. 
Bonus:
Then we’ll go to the casino together and place a few bets. You can vape an eCigar 