I agree with @SthrnMixer 's recommendations. So far the only thing I would suggest is that it come with a full glass and maybe a partially exposed glass tank option for all the klutzes such as myself who knock them over all the time. I am not a fan of the rubber band protectors (kind of like training wheels on a bike). Also, having the ability to utilize any 510 drip tip would be nice. We all like to put our personal touches to these things.
1 Like
I agree. The top of the Aromamizer sucks. I can’t believe they did that!
I think I can picture the square chimney in my head. I like it and the thought of using the flats and corners for your intended purpose makes sense but would it line up easily with each build?
The deck would be the same shape, and of course the chimney would have to snap in place similar to the Crown.
Edit: But it would probably require a screw like the Kanger.
I don’t like the look of them but I like the way the air intake works. I’m not a fan of moving metal parts so in that regard I do like the bands.
Now that would be incredibly cool 
hehe
1 Like
I totally agree with @SthrnMixer and @death
Just make sure it would suit everyones needs. Plus ohm, Sub ohm, screw in pre made coils, single coil build deck, dual coil build deck, MTL,(mouth to lung hit) DLH,(direct lung hit) and don’t forget it must work great with TC(temperature control) O ya it must be top fill with no leaking, easy to adjust air flow. And this list could go on forever but you get the idea The Perfect Tank to proudly wear the ELR name.
1 Like
No, no no! 
I knew this was going to come up. Believe me, I have designs going around in my head all the time for things. It’s just a matter of reverse engineering some tanks to get them modeled up to be able to really see how they work, and come up with a design based off of that. Some of you may have seen the atty holder I have in the works. This is my first vapor related design and is still a work in progress.
3 Likes
I like it!!!
Ok, here’s all you need to do for reverse engineering.
No RTA - make an RDTA just like the Aromamizer except rather than the funnel top with the awkward drip tip connector make it flat like the Subtank Mini with a fill slot like the Lemo 2.
RDA - not my main focus in life but a velocity style deck is a must! My idea is rotating/threaded ring with 3.5mm SS tubing for focusing air intake directly on coils. These wouldn’t go in perfectly horizontal but rather at an angle like 35deg or so, angled down and of course higher than the coil. It wouldn’t need to be long at all, just long enough to direct and focus the air.
2 Likes
That would require a machine similar to a Mazak Integrex, which 99.9% of machine shops can’t afford. I suppose a fixture could be made to hold the upper portion of the tank in at the proper angles to machine the holes. But it wouldn’t be too terribly difficult. The tank would just have to have a feature machined into it to align it on the fixture. I don’t have a Lemo 2. Is that a tank I should get?
If you like single coil tanks then yes, the Lemo 2 is fantastic. I traded an Ohmega for it and glad I did. Then I had a buddy send me an Ohmega 
Like a Christmas all the time.
The Dark Horse RDA (not known as a flavor RDA) uses a ring for air intake. Maybe look at that design . The ring sits on the main chamber and then the top screws down over it. Pressure sets the ring in place and prevents it moving.
1 Like
Oh hell yeah, that fill slot on the Lemo 2 is awesome. No problems with pressure build up like the Ohmega and the Crown when you screw the top back on. The TFV4 is a somewhat good design, but clunky. I get so tired of the gasket pulling out when I fill it and remove the bottle. Plus it’s messy as hell.
We need to start a new thread in the hardware section
1 Like
The one and only complaint I have with this dripper is no Single Coil option. I have modified mine by closing off the air holes on one side to make it a single coil dripper. That is my flavor testing device as I am not really a fan of drippers
Right? I was thinking the same thing. We all know what works and what doesn’t. It would be so cool to have an ELR RDA or tank…just to have the Chinese copy it. LOL
1 Like
Imitation is the highest form of flattery! Well, when it comes to the Chinese it seems they’ll copy anything 
Also the ELR logo (the two flasks) needs to be etched into the sides. www.e-liquid-recipes.com on the other side (bottom section) and something on the top section or bottom next to the 510 etched to say LordVapor.
1 Like
Ok made it here had to go do something. I love the velocity deck but I am still a single coil user so I had to modify mine to work BETTER for single coil builds.
What I used was marine grade metal epoxy. Possibly not the best thing to do but it makes using a dripper much more pleasurable to me. I would have gladly paid a little extra for a second cap section with air holes only on one side and I can not believe there are not others out there that would enjoy the same.
Now onto the tank design. I am liking all of the ideas so far but I still think a tank capable of single or dual coil builds with adjustable air flow from fully closed off to wide open enough for good direct lung hits would set this tank apart from all others. Also an easy deck to build and top fill that does not leak when filling.
I only own the original Lemo and 1 kayfun 3.1 so I can not give you good tank designs ideas in comparison to other tanks out there.
1 Like
RTA…Refillable Tank Atomizer…A refill port accessible without the need to remove the entire tank assembly from your mod …Air flow control, again, without the need to remove the tank assembly from the mod…smooth action firm adjustability from open to close…operable during the hit, as well…Actually I am in the process of designing some tweaks on my LemoDrop…and these are the two biggest issues with that RTA…A shame, because it’s an easy build with great flavor…
1 Like
After thinking a bit if you were to use the velocity style deck and get air from the bottom I guess if there was a way to block off the air hole and possibly the juice channels on one side that would accomplish the single and dual coil aspect. But probably an engineering and manufacturing nightmare unless there was a way to do 2 decks one single coil and one dual coil and make them easy to swap out.
I have started reverse engineering the Aromamizer just to get a design to start working with. I have to wait to suck the rest of the juice out of it to get much farther LOL. I managed to finish the drip tip though…
2 Likes