Thanks for the heads up! I’ll come back to all of this once it arrives.
1 Like
Ordered today. Now the waiting game. 
2 Likes
Where from, mate?
Ordered one from ft.
1 Like
Damn, I don’t know if I can wait a month for shit to get to the uk.
I need a new tank and can’t decide between the new griffin, Diablo or the moonshot.
1 Like
Theres some real nice attys coming out lately. Decisions decisions!!!
2 Likes
I think the one from FT is different than all three of the styles that I have.
Hahaha typical. Ahh. It is what it is my friend. It will show up as a surprise in a month.
In the mean time I’ve got 3 aromamizer’ers coming, the special edition, v2 and the supreme.
Trying to get hold of the billow v3 and the alleria. Hard to get in the uk.
1 Like
You are accumulating some nice tanks there I hope. Can’t wait to see what you think of them.
2 Likes
boreas.
get it.
Hard to get hold of bro in the uk. If I order from the states it doubles the price on just about everything for postage. Teargass 
@LordVapor and @BoyHowdy
Not sure if you guys saw that fasttech changed their listing for the Diablo 2.5ml tank to 3.5ml tank.
1 Like
In my opinion. The aromamizor supreme is the next best tank on the market. Check it out
I received my Diablo clone late last week. I have been vaping it all week. I also have an authentic. The quality of the clone is as expected, cheaply made and the finish is mediocre. it looks pretty good at a distance, but closer inspection reveals it’s flaws. There is no air flow control on my clone. Thats ok, I usually run wide open anyway.
The airflow is a bit more restrictive than the authentic but not much. The clone gives a great vape in it’s own right. For the money, very very hard to beat.
The grub screws that came with my are pure junk. Very soft. I replaced them right out of the gate.
For the money, this is a no brainer. A great vaping, top filling, bottom airflow RTA with a velocity style deck at a rock bottom price.
Loving it!
3 Likes
Got my 2.5ml clone and I’m happy with it “now”. I have to say that the machining on this is garbage. The one I received had cuts on the deck threads which make it a bit difficult to get the barrel on (once you do it 4/5 times it seems to get much easier). When I first built it, I kept getting a short reading and I couldn’t find a reason why. After taking out the center pin and looking at the positive post, I saw that there was a sliver of metal sticking out of the base of the post. Just enough to make contact with the deck past the insulator. A couple of seconds with the dremel cleared that up. On the underside of the + post where the bottom grub screw goes in, the threads are cut too low and you can see air in between the thread cuts. I was going to buy the 5ml version from him but now I don’t think so.
Like I said, I love it now. Great taste, great clouds. The deck is a bit tight but you get used to it. Thought of sending it back and requesting another but I already worked on this and it’s OK now so I’ll just keep it. I did email rya_morga @ ebay to let him know but haven’t received a response back.
2 Likes
I picked up four from the same seller and and just found out the last one I built was the same way.I am probably going to open up my juice slots on that one.It is a shame that it will fit huge coils but you can’t get enough cotton in to because of the narrow juice wells down the side.When you get the right amount , it makes it difficult to thread on the chimney due to your wick getting in the threads.I will experiment with that one and see what can be done before I alter the others.
The only other problem is the chimney that attaches between the deck and your top cap.It is threaded on both ends and it can be aggravating getting it set right for juice control only to have it spin while it is threading the other end.This can cause it to thread too far down and cut off your juice as well.
These things are really about the only cons I have , the flavor is great!
2 Likes
I only recently started using my Diablo - It’s pretty good. But the allen wrench and the grub screws suck, I think 
One of my screws is partly stripped… Other than that, it vapes pretty good.
1 Like
I got the Fasttech clone and the wicking sucks above 50w. I’ve tried 3 wicking methods and they all wick poorly. The first hit is good when the cotton is saturated. But after that it hits temp protect quickly.
1 Like
When I looked at the FT clones they didn’t appear to be as well made as the ones I initially grabbed. Can you post some pics?
1 Like
Great review on the clone El Diablo. Thanks for recognizing it was a clone. I have been looking at these for a week trying to find a good deal. Think my best bet is gonna be under 10 bucks on ebay. Shipped from shenzhen China.