I set 0400 for ti mate and its working a treat. Slighty
Warmer vape at 20f lower than the preset for ti.
0300 slightly anemic
0350 about the same as preset for ti.
0400 nice warm vape.
1 Like
Ss at 0088 is a no go for me. 0880 and itās a fog machine. Thats for 316l ss.
0940 awsome for 317l.
Havenāt got any 304 ss to play with but some due any day now.
2 Likes
Happy hollidays all! Iāve been cautious about pulling the trigger on this āmini of the month,ā for the same reason I havenāt for several of evolveās devices as well as Yihiās. I have an old Mac and wish to know the oldest OS this VTC mini firmware is compatible.
Dunno, try downloading the mac updater and see if itāll run on it - If itās an Intel Mac it probably runs. Not too sure about the G5ā¦
2 Likes
My evic mini v3 arrived today, and thank you very much for all of the helpful 317L tips!
Had it done in 30 secondsā¦the manual would have been of nooooo help.
2 Likes
I think you will like it. I just ordered my third one so that should speak for how much I like them.
This is my 2nd, first shit the bed after a week, but I really liked how well it did ss in temp control, and yall were posting even better updates for v3, I had to have another!
ā¦and then and RX200 too!
ā¦and then maybe a Cubiod next payday
ā¦or sooner!
(Iām getting my first evic warranties out, but didnāt wanna wait too long without one, damn v3!)
Something seems wrong to me about 0940 being the tcor of 317Lā¦it never bounces off temp control even at 400Ā°fā¦and my atty gets poker hot.
I switched to the 316L and it works much better.
This is the free 24g sample of 317L from UnkamenSupplies.
try 0094 and see what happens
1 Like
Bangs into protection too soon, very little vapor
ok try going up 5 to 10 at a time until it seems right I would try 0099 next then 0104 and so on
edit: I like a cooler vape and I find myself at 480F to 520F most of the time using Ti wire
1 Like
Great suggestion, followed your other as well and set m1, m2 and m3 that way I can find my sweet spot, working great! Thanks!
Please let us know what settings you ended up at in the end as others have also asked. I do not have SS wire or I would have already done this.
I am now using Titanium but I have found that setting the TCR to 380 is where I get the best quality vape and also able to run a lower temperature setting there as well
Been playing about with the tcr settings for 317L ss finding that if you set M1 at 0104 to 0109 Iām getting a nice warm vape at 420f and itās limiting the temp fine.
316L already has itās own slot so will be using M2 for 304 when that arrives.
M3 Iāve been using for ti and thatās set for 0400. I find that tcr is performing better than the preset for ti. Warmer vape at lower temp 30f lower approx. @5prock3t these settings might be of help to you bro. 
1 Like
That is exactly what I have found and my happy spot with Ti is with the TCR set to 380 but I like a cooler and slightly less dense vapor than many people do. The big thing I see is the ramp up time is cut way down making the overall vape quality much better in my opinion
The ability to set the TCR value sets this mod apart from all others except maybe the DNA200 ones but considering the price it is a no brainer to me. Just ordered my third one yesterday
The new update is working fine now Iāve had a bit of time to tinker with it and with different builds to find my sweet spot @5prock3t said the temp protection wasnāt kicking in on the previous values i posted so i tinkered and voilĆ , happy vaper 
As for the next one Iāve been looking at the joyetech cubiod. Just been released and already thereās an update to take it to 200w. Same tcr adjustments, same features. Have to wait a cpl of weeks first though for the old vape budget to rise again. 
1 Like
I was hoping the RX200 would get a similar update to the 3.0 for the mini allowing for the user set TCR and maybe this is why it has not got that yet. But I am more than happy with my miniās
With the RX200 Wismec will be handling distribution of the patches. Joyetech as the chipset manufacturer has a bit of an edge in time to market and early testing of the patches.
2 Likes
Iām sure the rx will get the update 3.0v. Joyetech are good that way.
I think the cuboid already has that pre loaded
1 Like
If the cuboid is as good on battery life as the mini seems to be it should be awesome.
1 Like