Now there response about the mob being the one they sent there global partner here in the uk had only this in stock. So instead of asking me if it was ok they just sent that ugly thing instead. There global partner could have easily sent a kit minus the rda and solved the issue. Lost vape is such a horrendous comapny to deal with. The one i got yesterday still sitting unopened in box. I put it back in its packaging cause its a ugly fking thing. I dont want to look at it lol
2 Likes
From what I saw under the 510 plate there’s an o ring this is trapped between the top plate and the 510 this would be the worse of the leaking and goes straight down the contact lead and on to the board. The o ring on the bottom of the 510 could possibly removed this would the let any juice out yep you’ll have juice coming out around ya bottle but it’s not in the mod
2 Likes
Did you say it worked but no fire button ???
3 Likes
Yup the fire button was deadand all the liquid was where the soldering was for the leads and it went all the way down the board
3 Likes
So after my complaining about just not sending me a kit for the same mod as the global partner had it they offered to send me the board and fire button. Thats their resolve.
3 Likes
Now they have offered me a Centaurus quest 200w kit is it worth it? Then it means i got two mods from them.
4 Likes
Take the Quest and run. Doesn’t sound like their offering a refund. Why make it harder on yourself than it has to be. You can buy the board and button if it bothers you. Make sure you have the 90 day warranty.
4 Likes
You can buy the button it’s only a micro switch not that bad to solder in
3 Likes
Im thinking it isnt the board its just the switch. Im ight just do it. I just wanted what i should have got. Could have easily found a kit in the uk i found two.
4 Likes
I will lol for sure
4 Likes
Im gonna grab a button and see if it the issue. And if it works im going to use electronic silicone to seal up any opening to the board. Its how vv vape did it on the pulse. And it was very successful of not getting liquid on it. I confirmed it by ripping the mod apart with angle cutters lol
4 Likes
Took the second one apart this morning and cleaned all the liquid from underneath the board. Im going to order electronic silicone to seal up the gapping hole. Its the only way it could be used as a squonk again. But until then im going to throw the glass in my steam crave supreme 3 and just use it as a mod. If i continue to use it as a squonk its going to die. They should have taken a book from vandy and put thin layers of that silicone on the board to protect the board incase of leaking.
4 Likes
At least you’ve got the top up bottle to use juice for days 
5 Likes
As long as it doesnt leak inside
5 Likes
This squonk mod is the very reason I will never buy a lost vape product ever again and I loved the looks size and feel of this mod.
5 Likes
I did too until it went shit. Im over it honestly
3 Likes
Well after about 2 months the new upgraded bottle decided it didnt want to stay in. The problem is the oring on the nipple. I put a different one in from a smok rpm 4 and it was a little big so i folded it twice and the bottle stays in. It def needs more solid heavier oring so it grips tighter. Def need to find some that are heavier
3 Likes
Duck tape or gorilla glue
4 Likes
I put teflon tap on it and that works too. But super glue does fix it all and i have been thinking of it lol
4 Likes
Until the bottle needs a good cleaning. Gets dropped and broken.
4 Likes