MTL Tank suggestion

Could check out these posts:
Traveling clearomizer
A new record low for full flavor!

1 Like

Flash e Vapor V3 and V4 are great for MTL. Easy to wick, 5ml, undestroyable. About 20 $ for a clone at Fasttech or Gearbest. Search for FeV
I Like it very much. The K5 has to much air for me.

New i got the Siren 2. Is also very nice and has a wide range of Aircontrol.

2 Likes

If you like the Nautilus 2 I would just get the Nautilus Mini. In my opinion better than the 2 and with the same BVC coils.

1 Like

well i could suggest you

a) Kangertech Top Tank Mini
b) Kangertech Protank 4 (toptank and protank other than the manufactured atomizers also have an RBA to make you own builds, Toptank comes with a single deck, Protank4 with a velocity Rba)
c) Smok Brit (i don’t really like this one but it’s supposed to be one of your choices)
d) Vandy Vapes Berzerker RTA (it’s an amazing RTA for MTL)
e) Triton Mini (it’s ASpire too, though you said you want to avoid, it’s still an Excellent choice)
f) Wotofo Serpent Mini (works as both MTL and DL…i like that one)

there are way many more choices, i am sure other people in the forum can guide you much better since i am more a DL vaper… :wink:

gl and hf :slight_smile:

1 Like

If you’re interested in branching out and trying a rebuildable…the Digiflavor Siren V2 MTL atomizer is supposed to be pretty awesome. Plenty of build tutorials on youtube about this tank. And only requires one coil, say a simple 26 guage wire coil. Flavor is supposed to be great, airflow is very adjustable. Been thinking about it myself even.

1 Like

Personally loved my nautalius x. thinking on and off again about going back to that setup, especially since they released the survival kit, and i can now treat it as an rta. hate dropping money on coils. And yet, I’m still eyeballing stuff like the icare 2 because i want a smaller, mtl like experience that packs more punch. yeesh.

1 Like

I absolutely love my SXK Billet Box clone for MTL. It comes with an attachment for the Nautilus coils or you can go for the Exocet / Insider coils. I’m currently using the Exocet and just love it.

I like both the Triton I and II. I think I like the I a little better because of the look.

I have 2 of these & can say they are great little tanks!.. reliable & flavorful. I also have a Nautilus X - not as good as the mini’s IMO.

However, if its a first class MTL vape that you’re after, then…

…is the only way to go!! Its really easy - not as hard as you might think. you can buy pre-wrapped coils if you dont want to wrap your own & each coil will last you weeks & weeks (& weeks!..if not months …depending on the wire you use). All you gotta do is swap the cotton out …usually once a week or so - you’ll be doin it with your eyes shut in no time!! It really is a far more superior vape than BVC coils!
I have the Siren V1 - its a stellar vape except for the airflow, however this issue has been sorted with the V2
I also have a Berserker by vandy vape - tremendous flavor - my go-to MTL tank that I use every day. (In case you get one of these, I’ll just tell you now that the deck can be prone to flooding (gurgling) if you dont fill it correctly - close the airflow to fill then put the top-cap back on and turn it upside down when you reopen the airflow - havent flooded once using this method!)
Which ever way you choose… Enjoy!

Wow, such an incredible amount of suggestions! :sunglasses:
Thank you so much everyone, I will carefully check all the options you suggested.

One thing I’m now also considering is a rebuildable. Aspire BVC coils are good but won’t last more than a week and I’m kind of sick of wasting money on coils.

The Kayfun is an interesting object, though expensive. Someone know where to find a good clone (in Germany) for starting? I also see they now made a Kayfun Prime tanks which is specifically made for MTL. Someone tried it already?

Again, thanks a lot for the suggestions. Amazing community this :+1:

Oh my gosh, the Lemo Drop was great as MTL, probably one of the best restrictive draw tanks I had. The drip tip was so long, but it didn’t seem to impede flavor much. Didn’t leak a single drop either. I wish I hadn’t got rid of it, it would be stellar for menthol flavors.
Ha keeps correcting to Lemon Drop :grinning:

Here ya go! You’re in luck! https://vapenw.com/atomizers/rba/lemo-drop-rba-by-eleaf

It is truly a classic. Get a lot of positive remarks as well as an amazing vape.

Lemo Drop…one of the best…My first…Still have it…Hate the air flow control…Working on a re-design of it…the air flow control,that is…Outstanding flavor and draw…

1 Like

Just got this in.

Stellar vape I must say. The con is opening it cause the airflow ring spins. But with the coupon code MAP I paid 10.36 dollars so doesn’t hurt the wallet.

Normally I use the ego one mega v2 by joyetech for an MTL vape. The clr coils are great and easy to rebuild.

The kabuki works with Nautilus coils aswell

Pbusardo( MTL guru on YouTube or sort off) is releasing his rta. Which is very similar to the siren v2 and vandy vape beserker

Original Innokin Ares MTL RTA tank 4ml 24mm Slide top filling designed by P.Busardo Vapingreek E-cigarette atomizer
http://s.aliexpress.com/N7B77na6
(from AliExpress Android)

Possibilities are endless really

1 Like

+1for the SXK Doggystyle with no cons. My airflow ring doesn’t spins.

Anyone ever have paypal issues through PayPal on 3fvape? I Just tried for that kf prime and was declined. Never had the issue with heaven gifts, fasttech or efun. Wondering if it’s because the seller has vape in it’s name? Or my card company are being jerks. I only use debit online but there’s plenty loaded on it.

Not me, mine usually go through smooth.
Well, let me check, because I think my last few were PayPal, but some before were not.

1 Like

That Matrix Rda on there looks nice. I might have to get me an Xmas present. :blush:

2 Likes

I ended up buying a Kabuki clone and a KayFun V5 clone, both from Fasttech.
The Kabuki uses the same Nautilus BVC coils and seems a nice object.
And with the KayFun I will start experiencing with RDA.

Thanks again to everyone for the invaluable suggestions :smile:

Now the problem is where to start for self wicking and coil wiring. :thinking: so I opened a new topic here: