Mutation X MT RTA: How do I explain just how incredible this tank is?

bradslinux · February 7, 2016, 6:13pm

I have a Goblin Mini as well. I get really good flavor out of it. The only issue I have with it is a bit of restrictive airflow. I run similar builds in all my RTAs and get similar results. 7-8 wraps 24ga Ti around either a 2.5mm or 3mm bit at between .10 and .14 ohms. I use a 3mm on the Mutation to allow enough wick to cram into those HUGE juice channels.
I was playing with 26ga for awhile with more wraps around a 2.5mm bit. Great flavor but the coil is difficult to not destroy when re-wicking. Very fragile and I can be a bit brutish with my big hands.
I have a 22ga Ti build 8 wraps around 3mm @ .08 ohms in the Griffin that is so far flippin’ amazing. I don’t go lower in resistance than that as the DNA 200 limits power if loaded below .08 ohms.

As each of these needs to be rebuilt, I will change to 24ga and 22ga 316L SS. I have been wanting to try it for a long time now. I have a SS build in my Twisted Messes RDA atm and I like it pretty well. The coils seem to get stiffer than a weddin’ dick with use. Makes sense because SS work hardens fairly easily. This should be nice for re-wicking and my brutish hands.
I totally agree with you about the Bellus. It is a great tank. Capacity, flavor, airflow are all solid with it. I still have a .26 ohm 26ga Ti build in it that is really amazing on flavor. I’ll leave it in there if I can re-wick it without destroying it.

All of these RTA’s are amazing in one way or another. It’s a great time to be vaping.

therabidweasel · February 7, 2016, 6:29pm

I still have a Griffin to build, haven’t eve opened it. I bought Cthulu at the same time, and it looks to be smaller on chimney and coil space than the Griffin so I’m going to try it first. I’m going to bookmark this so I can copy your builds next time I need to build those Attys.

it’s well enough that I don’t like the GM so far though, because I despise that little fill screw. The only thing worse than that is the non-mini Goblin. What a piece of garbage that is. Thought I was buying the V2 mini.

bradslinux · February 7, 2016, 7:14pm

Yea, the little fill screw is a pain, but I knew about it going into it. I have a pair of tweezers that are designed to hold small screws for optical work. They are a charm for that @#($^&* little screw.
Right now I’m making some 24ga/34ga Kanthal claptons for when my Noisy Cricket gets here. I was worried I forgot how.

Sorry for the thread hijack. ok…not that sorry. hehehehe
Hitting on some Third World Custard in my Mutation X MT RTA.

therabidweasel · February 7, 2016, 7:18pm

Wish my claptons looked half that good. I’ve accepted that I suck at making fancy wire. It’s going to blow you away. Hell one ugly, single clapton is knocking my socks off!