Great review @SessionDrummer, I think you coved this well. I think the Creed is a great tank. Lot of tanks have gotten high marks lately. Hope it continues.
2 Likes
What a great review brother, so much so I just ordered a blue one to go with my PSO Paranormal too, such an awesome mod 
I know how much you love SC so your review definitely put me over the top to order one! Thank you, I am gonna start stalking the mail now 
2 Likes
Great review. Must be a good tank with you’re digging it right along with your SC.
2 Likes
Thanks a lot @Beaufort_Batches. @mjag thanks for the kind words and I can’t wait to see how it looks blue on blue !!!
2 Likes
I’m sorry for the late response, I finally made it to the review section, which surprisingly didn’t show up under the “new” tab lol.
Thank you for the review @SessionDrummer, very informative but that yellow background has too go! Lol
I hope they are going to make a single coil version, I really like the look of the creed and need a “brother” for my kylin mini. I’m just so over dual coils, however if it’s as flavorful as you describe, I might make a exception. Keep it up 
1 Like
Thank you @eStorm, tech. this can be run as a single, but the plug was not included in my testing sample.
1 Like
On yeah I know, but remember I’m that weird person? Lol.
Anything labeled as dual but can be run as single never works out for me. Even with plugs it’s too much or too little airflow, since the deck/posts weren’t designed for single.
I can run a dual in my single rta as well, but it will just not perform as good, since it’s not designed for it.
Some people like it tho, I’m just extremely picky 
still good that you’re pointing it out. Thank you.
1 Like
Well I’m going to go on the record, that I’ve not had great “Just insert the plug, that’ll make it a single coil setup” experiences myself either.
1 Like
Well it has arrived and again Thanks for the Steller Review! She vapes like a dream!
Took me a minute to build as it is kinda tight with the airflow dams or whatever they are calling them. I was able to get dual 5 wrap fused claptons on her and wicked! Came out to a .16 ohm build and she hits like a freight train running 60!! I am tasting every nuance in @Alisa Bust a Nut RF ejuice and now I’m ready for the weekend!
Oh do me a favor, and don’t review a mod that this would look perfect sitting atop of!!
3 Likes
This appears to be the Single coil Plug. Came included in mine in the spare parts bag! Now you have no excuses
1 Like
@atssec97 Thank you very much, and I’m glad you’re getting similar results. A flavor freight train sound just about right. The “air sleeves” or whatever they are DID challenge me, and my first build wouldn’t fit, which started me guessing about the frustration factor, but simply using 1 wrap less, fit right in. Now that I know that, and tried to pass that on to others in the review, I’m aware, and building is a non issue. Vaping it even now, far after all of my review testing, about the ONLY thing I found (but it’s USER error, and common to many setups), is if enough cotton is NOT used, it can spit a little bit, but, not limited to this device, more of a common under wicking side effect.
I think I have tried close to 10 different mixes in this that I know well, and it hasn’t shown any signs of slowing down with it’s damned colorful flavor chucking ways.
2 Likes
I am really diggin this RTA. I have wicked it three different times trying to get it just right. I’m using the scottish roll method and on a 3mm ID coil my last wicking was TIGHT! As in twist and pull so i don’t pull the wick apart as i work it into the coil. I’m not getting much spit back just massive vapor production and flavor!!! Also didnt comb out as much trying to resolve a leaking issue when i refill it! I must be doing something wrong as everytime I fill it back up i’m getting juice running out of the airflow holes on the base. I need to figure out how to relieve the pressure when putting the cap on so it quits forcing the juice out! Been looking for an answer on youtube/Google but no luck so far! Any ideas?
1 Like
I may have resolved it! filled it to the max, screwed the top cap down but not completely and inverted the tank and as the bit of air left in it went to the top (Bottom) i finished tightening the top cap! Not a drop!!
IDK if this is standard procedure but hey it works!!!
1 Like
@atssec97 I was actually brainwashed by my SC Supremes and didn’t know it. On them, all air flow needs to be closed before uncapping and filling or it was guaranteed to pour juice out. I caught myself doing that on the Creed without realizing it. The next 3 fills, I reluctantly left them wide open, uncapped, filled, re-capped and vaped. Did I get lucky ?? Not sure. I made sure the cotton in the coils was tight for no spitting, and the tails I thinned a bit and placed in the juice wells. A few times, I cut a 45 degree angle off the very outer sides to allow for easier tail stuffing.
I am actually due to fill it right now, and will try to fill to the top, with the air flow wide open, just to verify.
1 Like
Alright, just did probably my 12th refill, and left the air flows wide open, filled to the top, which was basically until it started over flowing the curved fill slots, but not up to the very tippity top, screwed the cap on, no leaking. I’m using KGD cotton, rolling it into the coils, thinning, and inserting. I’m going to guess I have more cotton tails in my juice wells than you ??
1 Like
I misspoke @atssec97, I meant the JUICEFLOW had to be completely closed on my SC Supremes to prevent pouring.
1 Like
That may be possible, I’ve been wicking pretty close to the way Mike Vapes shows in his review of this device. I have some tail in the juice well but its not extending very far into them. I’m also using the KGD cotton, been peeling the the outer layers off and rolling into the coils. I did try with the air flow control off and still was getting the juice drips. That’s the only time this baby drips though.
I actually, intentionally laid my mod on its side in the truck earlier when we went to dinner. Had it on some paper towels and after dinner i was surprised to find it nice and dry. I will keep playing with my wicking and see if I can get as Lucky as you while refilling!
Appreciate ya!
1 Like
I’ve not seen Mikes video on the Creed, but I can tell you that my tails are pretty much to the bottom of the wells. Not packed in, but fairly deep in there. Have not had a single dry hit or wicking issue thus far.
2 Likes
I will have to try that on my next refill! It’s got to be in the wicking, I tell ya wicking is an art form! For something that looks so simple!
Thanks for all the help!
PSSSS!!!
If I allow the tank to run completely empty but not dry hitting, I have no issue with the drip! Just thought i’d add this tidbit!
2 Likes