That’s awesome!! It’s so tiny! 
1 Like
It is 
I am used to hold a dual battery mod and now this @ home, works like a gem !
Sorry @Wings4Life I misunderstood that. I thought doing that would lock the mod totally, but instead it locks the +/- only. This makes a HUGE difference in my opinion because I thought I’d have to lock and unlock the mod every time I did the ol’ squeeze, which isn’t true. Thanks for the tip!
1 Like
Crap! Sorry about that! Should have mentioned that you could still fire the mod when locked! Glad it helps out!
2 Likes
Mike’s 2nd Hack
I also heard they were going to make a silicone bottle for this mod
3 Likes
3 Likes
GBOX 200 on sale at 8vape. Best price i’ve seen stateside.
3 Likes
Way cool I didn’t see that thread but now people can see the video
1 Like
That is a good price
I just ordered the YFTK Sentinal RDA
it looks like a good one I like the top airflow 
4 Likes
looks nice since u can use any chubby to switch mixes when u want, only concern would be the delrin threaded connection vs. geekvape’s which i heard was s.s
2 Likes
I love the FLASK you can use it with the 510 or as a drip bottle and the price has come down 
1 Like
i havent took the plunge yet but pay attention to the conversations of those who do. I heard the flask was nice but that came to me in email and thought have its place since u can use any gorilla and change out mixes easier if so desired. It would be a cheaper alternative then buying more of the geekvape ones, just thought id share.
2 Likes
Item Name Qty Price Total
Geek Vape Flask Liquid Dispenser 2 $18.99 $37.98
Regards,
Eciggity
Plus at the time I had a code
code at the top of page ( TENOFF )
3 Likes
Thanks for sharing Mike’s video. I just gave my Gbox an upgrade. Thanks to @Nappen for doing the testing to see if the bottle would work. Now I didn’t even consider doing it Mike’s way, simply because I think continuously connecting and disconnecting that surgical tubing is just going to wear it out and start leaking. So I opted to do as Nappen did, and remove the ss tube and the little bracket completely, then install the new silicone bottle.
Looks awesome IMO. The refill with a 510 squonk filler is easy, but just in today…the Geek Vape Flask. It’s much easier. But either one does a fine job, so you can find the little Boston Round ones for around $5 while the best price I’ve found for the Flask is on eciggity…
Also replaced the one for the Drone
7 Likes
Way cool I have a tall Lost Vape bottle that came with my Lost Vape Refill bottle that would work perfect for going @Nappen’s way 
I just like to take out the bottle to clean it without having to take out the screws of the mod I feel that after several cleanings it might strip the threads on the mod but I’m going to try to use a old rod so I don’t have to cut the Gbox one
2 Likes
Alright, I like the Kanger DB160, is there any other decent non-mech mods that are good?
1 Like
Weren’t they having problems with the 510 leaking with that mod? Or has it been fixed? I was tempted to pick one up before I read about that.
If it’s an original one of the LDPE bottles I don’t think that’s any better than the stock. The LDPE isn’t bad until the bottle gets about half empty, then it becomes an utter bitch to squeeze. That’s why I replaced the one on the Gbox and the Drone. Those are soft silicone bottles and just so easy to squonky squonk.
If you like your power, so far the Gbox is an ace. Nice power except for in TC which is limited to just 80 watts. Maybe your builds would be ok, but the way I build is almost half of the watts I need.
Another member and I have discussed it, and while there’s a little work involved, replacing the supplied LDPE squonk bottle with a silicon one and the squonk bottle compartment cover’s screws with magnets will make this a much friendlier and efficient mod. I’ll be getting to the magnet thing in the next month.
3 Likes