Nic and flavors for me .
1 Like
What state do you reside in?
(I might need to come hunting my juice upā¦ lol)
@CallMeTut, Texasā¦ but Iām moving. I finally cracked and mined the mountain of personal belongings boxed up in the garage for my vape gear but I have like 5mls of 48mg/L nicotine. Prepping your house for sale (while renting another one!) is impoverishing ā¦and so is buying premium ejuice. Iām freaking out. My BCV wishlist has like almost 100 flavors. I have a DIY itch I canāt scratch~! I just wanna dip my toes in that Nicotine River 
ā¦I need a drink
2 Likes
Are these the screws?
http://www.fastener-express.com/M2x.4x3mmPanPhillipsMachineScrewsA2StainlessSteelQty.aspx
From what I was told, the bottom of the head is actually flat, for easier wire capture.
And here I am in Misery (Missouri)ā¦ just got told yesterday they (my employer) want me to go to Georgia for between 2 and 3 weeksā¦ and while I have a dozen juices mixed up and ready to vape (about 3 weeks steeped on some) a month or so on some othersā¦ I just looked at my list of things I had planned to mix/test and it totals up to 19 batches grrrr
I really need to stop making 30 or 50 ml batches and only make 15mlās at a time. I keep making too much juice and it really kills the fun of mixing, because you get into a syndrome of ādonāt need to mixā¦ you already have plentyā.
4 Likes
@CallMeTut I was going to make a joke about coming to babysit them for you, but it started to sound kinda creepy. You better just ship here so I can make sure they donāt get too old 
If you think about it you better mix up a few more batches before you go. Theyāll be juust right when you get home. The ones that are ready? ā¦ship them to the hotel youāre staying at so the TSA doesnāt snag 'em outta your suitcase and put you on some ālistā. My kitchen is squeaky clean, but I may not be able to resist mixing up 3 X 30mls this weekend (people keep coming to my house at the most inopportune times! I have to always wear clothes and stuff)
1 Like
Need some thread to make a good groundā¦
Iāll be driving (I can take more things when I drive instead of fly) TSA hasnāt bothered my juices in my check baggage as of yet, but over the last year or so, my employers have allowed me to drive w/exception of when I had to go out to LA or Boston or one or 2 immediate short notice requests for me. What Iām really lucky about is that Iāve been traveling with another person a lot lately and they donāt mind me vaping while we drive, so I am pretty lucky in that aspect.
5 Likes
Yeah, it surely helps. Once I got the threads to start it crushed the wire down enough to get a few turns on the screws. It is just a byatch to get them started.
Oh, the Sammy 30qāsā¦ well worth the extra buck or so. I have both VT133ās running now. Both have Diablos on them. One has 25rās, the other the 30qās. The 30qās outlasted the 25rās by a few hours it seems, and I was trying to vape each device equally.
4 Likes
That looks like them. But I am not sure of the thread size.
Thanks for sharing. I just ordered 4 for $19.96.
2 Likes
I am not sure if they are the same as OEMā¦ @LordVapor believes they are KM2 x 3mm
I donāt understand the [.4], but the āKā should mean stainless steel, and to work for thicker wire they would need to be 3.5mm in length.
It also makes a difference if the screws are for an authentic model vs a clone. They can surely be different.
The .4 is the thread pitch. US Standard expresses threads per inch. Metric uses thread pitch, which is the distance between threads. In this case, the distance between threads is .4 mm. I didnāt dig deeply, but I didnāt see 1/2 mm size differences, in length. They had 3, 4, 5mm, etc from my brief glimpse.
This site was recommended for replacement deck screws, and fill screws, for the Kayfuns (clones). One of the comments from the post, was that the stock deck screws have a slight bevel to the bottom of the screw head, making the wire tend to slip out. The screws from this vendor had flat bottom heads, making wire capture easier (at least single wire).
Next time I have the STM RBA out, Iāll see if the Kayfun screws fit it, thread-wise.
1 Like
Thanks, I understand, just not used to seeing it written that way.
They sell replacement screws for certain decks on e-bay and fasttech
which are specific to that tank, but also a drop down box for selection
of sizes. I just donāt have anything to measure this tiny.
1 Like
You should look at Vaping Bikerās vid on the Protank 4 before using the RBA
3 Likes
Iām wondering if Kanger will change that. I was thinking about buying the Protank 4 and doing a little research when I saw this video.
Mass production at its finest 
3 Likes
ā¦and a mad rush to beat the deadline. Iām sure weāll see a lot of sub-standard products in the coming days.
5 Likes
well thatās thatā¦geez. thanks for the heads up @uncaged
@ozo just in case you pick up the protank4 take a look at this
1 Like
Itās a bit of a cock up by Kanger for sure. I was looking at reviews because I had every other pro-tank before it at some point