I would say this one has a bit more air than the V2 which makes me happy. It’s a RDL vape, probably leaning a little more to the MTL area. The only con I have found with mine is when screwing the tank all the way on the holes are sitting right at the back of the mod, so it blocks the airflow a bit. I fixed it by using a spacer disc but If you had a different 510 pin that was not as long that would fit in it ( I have lots of parts laying around so I do have one ) Or it might have been a fluke with mine, who knows… Screen is itty bitty but fairly bright. Only has wattage, volt and bypass. The profile RDTA fits well on it too. So, 26mm? I think that’s what the profile is. Also, it sure looks and feels like real abalone, not a sticker. Impressive. EDIT: Looks like the Profile is 25mm
hey folks. has anyone heard/dealt with vapingland.com ? i went there to see what shipping was, it showed me, but on the same page was where to enter CC info, there was no place to enter CC info. so i clicked place order to see what was next, and my order was placed ! wtf is that ! lol . my CC info is not saved on my computer.
side note, anyone know where they are ? looks like stateside, but idk.
Never heard of them before
Seems it a fairly new site,
.
No Phone # in Contact Us is always a turnoff for me 
Really? You’d think wattage mode would be pretty standard these days.
I seen some people complaining about a voltage cap. That there’s no booster circuit. Low ohm builds or coils don’t need the voltage higher resistance coils do. So Someone like Jai haze who only uses thin Kanthal with a ton of wraps, can’t get the voltage his coils need to fire optimally. It’s probably not a big deal.
thanx. i figure it is some kind of scam, all they got is my mailing info. or they have gone out of business and that was their way of shutting down.
i fully don’t expect to get the mod.
It is what Voopoo supplies within their skins. The Drag three is the same. You can’t get into wattage mode on either out of the box. Out of the box it it defaults to R mode and you can’t change it till you download two files. It is basically a new skin that allows you set wattage mode when not using their PnP coils. Files are on Voopoo site.
Ah, I see. Yeah the new modes are a bit weird. I noticed they ditched TC all together on the Drag 3 and kept things basic. I mainly used it in the RBA mode.
It’s best for their PTTP tanks(pods). Now yogot me thinking. I got PNP tanks (510 attached that take the RBA’s. Have to find where I put them. Will report back.
Uh oh… I may need help , I didnt know this
Do you remember length of coil leads? Where did you set the coil for the RBA?
If that’s the case, you would probably be the only person in this forum with dust on their wallet 
I don’t have the RBA. I just use whatever tank I want in R mode and adjust wattage from there.
Just off the boat from China - another ‘Filter’ 
Asgard Mini Clone in Polished Stainless. I have various OG Asgards, but could never seem to get my hands on a stainless. Reviews on this one reckoned it was 1:1 We shall see…
The R mode is the automatic mode . Same as reding the pods. It gives and sets at max wattage for coil ohms. I don’t have patience. I cut the tails at 5mm and installed where they bottomed out on the rba deck. So far so good 
I fight the urge every time I see something I like as I don’t “need” anything else. But as we all know there’s a big difference between need and want!
I actually try and practice what I used to preach to my kids when they were younger.
I used to bring them out every Saturday morning and we’d wander around the mall and grab a McDonald’s or similar. They’d have their pocket money at the beginning of each month as long as they’d been good and done their chores etc. Needless to say that come the beginning of the month they wanted to spend every cent and I used to try and teach them budgeting.
Just the typical you can buy it if you want but you won’t have anything left for the rest of the month so do you really NEED it. Sometimes they couldn’t afford whatever it was and the option was to save their money until next month and/or do extra work to earn more. They’re both at work now and not brilliant with money but not bad either and I sometimes hear my words being spoken by both of them. Time will tell with that one but you get my drift.
So here am I now being so hypocritical it’s criminal fighting my need for another vape purchase!
I also have to contend with the wife reminding me of any excesses… shall we say.
I do somewhat justify any money spent with the fact that I don’t smoke anymore,rarely go out and only drink alcohol occasionally.
I honestly believe that I could be doing much worse with any spare money and invariably lose the battle bracing for the inevitable words of wisdom from the financial controller.
Funny how life goes full cycle.
Wow i wouldnt have guessed it was a clone by the Pic
Yeah, I used the two TPP coils and set the tank aside. The R mode works just like wattage for me. I’m using a Nunchaku subohm tank on it with .2Ω coil. I can adjust the wattage from 5 to 177W. Above 80 it turns red which is just a gimmick I’m thinking.
I saw some on Fasttech. They might be different from yours though. In the pictures I didn’t see any markings on the top cap.
I just recently got my hands on a Mini and an original 30mm, both are brushed stainless. I prefer the texture but that’s just me. I’ve never had a 30mm RDA before and the size of it was shocking lol. It doesn’t show in pictures but it’s much larger than the Mini.
It’s flawless, comes complete with all extras including beauty ring with all branding in place. The only difference is it came in a plastic tube as opposed to the standard VC velvet pouch and no copper 510 pin (which may have been missed as there was an extra empty clip bag).
I purchased mine from FT (the manufacturer is Ulton). They never show the branding on clones either in product shots or videos (in videos you will always see logos on sides and bottoms covered by their fingers). I wanted a polished stainless to go on my stacked polished stainless Dreamer.