Vapesourcing.com - The Latest Vape Devices & E-liquid

[Vapesourcing]

Merry Christmas! Do you think Eleaf iStick Nowos Kit can bring you special vaping experience? This cheap vape mod kit can fire up to 80W with the built-in 4400mAh battery. And another 80W vape kit is also recommended to you - Wismec Active Kit.

Eleaf iStick Nowos Kit is leading the way with the innovative LED digital display and touch buttons, where aesthetic looking meets easy operation. It houses a built-in 4400mAh battery and supports QC3.0 / PD3.0 protocol for faster charging than ever. Another revolution is the use of TYPE C. Unlike older USB cable, it doesn’t matter which side is up with the TYPE C.

Designed to be exceptional in every way, the ELLO Duro atomizer that is paired with the iStick NOWOS also comes with two new kinds of dual mesh coil: the HW-M Dual 0.2ohm Head & the HW-N Dual 0.25 ohm Head, bringing you the best vaping experience.

Parameters
iStick Nowos Mod
Size: 43mm x 28mm x 83mm
Power Range: 5-80W
Battery: Built-in 4400mAh Battery
Battery Type: 18650
Resistance Range 0.1-3.0ohm
Output voltage: 9V max
Charging: 3A QC
Thread: 510 thread

ELLO Duro Tank
Size 28mm *54mm
Capacity: 6.5ml
Coil Type: HW-M Dual 0.2ohm Head(Pre-installed); HW-N Dual 0.2ohm Head
Thread: 510 thread

Wismec Active bluetooth Kit with Amor NS Plus Tank adopts wireless technology(bluetooth technology) to be not only a good vaping companion but also a high-quality speaker for playing music. If you like music, then this kit enables you to enjoy vaping and listen to musics simultaneously. Plus the waterproof, shockproof and dustproof design, the WISMEC Active is definitely a desirable vaping device. The newest Amor NSE atomizer, designed for both MTL and DL vaping, comes with 2ml/3ml e-juice capacity, retractable top filling and refined bottom airflow design.

Parameters
Size: 55.6mm26.6mm142mm
E-liquid capacity: 4.5ml
Output wattage: 1-80W
Output mode: VW/Bypass/TC-Ni/TC-Ti/TC-SS/TCR mode
Resistance range: 0.05-1.5ohm for TC modes, 0.05-3.5ohm for VW mode
Temperature Range: 100-315°C/200-600°F (TC modes)
Maximum Charging Current: 2A
Maximum Output Current: 50A
Output Voltage Range: 0.5-9V
Thread type: 510 spring loaded connector

[Vapesourcing]

Whole Site E-Juice Price Off-Lowest At $2.2 Per Bottle!

Hey guys. All e-juice in vapesourcing online shop have been reduced in price. Would you like to spend the Christmas vacation with some new fantastic flavors? Just jump into action now.

Entrance: https://vapesourcing.com/e-juice.html

[Vapesourcing]

Guys, Today I recommend you one newest cheap pod vape kit - Hugsvape FMCC Frozen starter kit, which can bring you SDL vaping experience in your vacation. Now let’s see the introduction about this vape kit below.

The Hugsvape FMCC Frozen Kit is a brand new pod device that gives you SDL vaping experience, which is a new concept between DL and MTL, yet they’re different. When it comes to DL, you inhale vapor hard straight into your lung.

While with SDL, you inhale vapor gently and let it linger a short moment in your mouth before sucking it down to the mouth. SDL is a combination of flavor and vapor production. The FMCC Frozen is powered by built-in 2500mAh battery and comes with 5ml refillable cartridge.

Parameters
Model: Frozen
Battery Type: Fixed
Product Type: Pod System
Battery Capacity: 2500mAh
Coil Rebuildable: No
Drip Tip: With Drip Tip
Telescoping Mod: No
Variable Voltage (VV): No
Variable Wattage (VW): No
Charge Style: AC/USB
Coil resistance: 0.9ohm (12~19W)

Order it now: https://vapesourcing.com/hugsvape-fmcc-frozen-kit.html.

[Vapesourcing]

Damn Vape Fresia RTA-World’s First TIT AFC System

Hey guys! Can you image a vape atomizer that is perfect for both MTL and DTL? In the following, we’ll take a look at such an RTA. Ok, here we go!

Damn Vape Fresia RTA is a 22mm MTL / Restrictive lung hit flavor RTA. It’s 2ml / 3.5ml in capacity and available for High / Med / Low concentration of Nic Salt or Regular e-liquid (Freebase e-liquid). It also features world’s first T.I.T. (Tube In Tube) AFC systemm, that means you can switch freely between MTL and restrictive lung through AFC ring, but without changing any airflow reducer / cube. In addition, the compact chamber, bottom airflow and raised build deck will bring closer throat hit… Overall, the Fresia is all for flavor! 4 colors are available.

[Parameters]
Material: Stainless Steel
Size: 22 x 43.4mm
Capacity: 2ml/3.5ml (Extra bubble tube)
Coil ID: 2.5mm(recommend), 3mm
Drip Tip Type: 510 (1 x 4mm bore, 1 x 5mm bore)
MTL Holes: 0.8 / 1.0 / 1.2 / 1.6mm
Restrictive Lung Max Flow: 2 x 9mm + Ф1.6mm
Tread: 510 thread

Like it? Buy here: https://vapesourcing.com/damn-vape-fresia-rta.html

[Vapesourcing]

Best Tank For 86W Teslacigs Punk Mod-Uwell Crown IV Tank

Hey guys. Not long ago, Teslacigs released the Punk 86W Mod, I was attracted by its appearance of mechanical elements at first glance. In order to find a sub ohm tank to pair with it, I visited many vape shops near me. Finally, I got a perfect match. Ok, let’s dive down for more information.

Firstly let’s look at the Teslacigs Punk Mod 86W. It is a new vape pen style mod with very interesting styling. You may still remember the 120W Tesla Punk Nano Mod – this is still a pretty desirable item. So you can see what inspired the design team to create the Punk 86W. Other mods in the Punk range are the Punk 220W and the Punk 85W – not to be confused with the Punk 86W – very very different indeed!

The Punk 86W is marketed in some places as being a “Mechanical Mod” however the fact there is a screen and multiple safety protections means that isn’t quite the truth is it! There are Short circuit, reverse polarity, low voltage, over firing time and high resistance protections. It does look like a mech mod I suppose and it takes a single 18650 battery. The maximum output is 86W and you can adjust this via the adjustment buttons and 0.49in OLED screen. There are 2 power modes: Variable Wattage and Bypass. Just hold it in hand to rock.

Like it? Buy here: https://vapesourcing.com/teslacigs-punk-86w-mod.html

Then is the Crown IV Tank Uwell. It is the ultimate flagship vape tank structure, introducing a new line of Crown coils with materials improvements, a simplified threaded top-fill system with 6mL maximum capacity, and a striking visual design. The Crown IV presents a brand new patented self-cleaning technology within the atomizer core of the new Crown line of coils, absorbing excess eJuice into a condensation holder for later vaporization during usage.

This helps reduce on wasted eJuice and lessens the need to clean the detachable structure of the tank. In addition, within the atomizers is the patented Pro Flavor Core Optimization System or Pro-FOCS for short. This system recycles the in-taken air twice through the core of the atomizer to saturate the recycled draw with additional flavor from the vaporized eJuice. Also, the Crown IV hosts a simplified quarter-turn threaded top fill system for faster refills and less downtime between cloud chucking sessions. Furthermore, it has a visually striking design, being hand-polished and knurled at the top and bottom ends, making airflow manipulation and unscrewing of the top fill system even easier.

[Vapesourcing]

Guys, I will recommend you one newest vape mod kit - Teslacigs Poker 218 Kit, which consists of powerful Poker 218 mod and resin tank. This vape mod kit is also with the features of waterproof, shockproof and dustproof.

The Poker 218 mod is made of Zinc Alloy and comes with classic poker element designed in appearance. Powered by dual 18650 batteries, it can be fired up to 218W maximum output.

With big fire button design, it is simple to operate. The vape box mod also supports various modes to achieve different vaping experience. The OLED screen displays data clearly. What’s more, Poker Kit has extreme water, shock and dust protection.The resin tank is constructed of environmental resin material and pyrex glass. Comes with convenient top filling design, you just need to pull up the top cap and refill e-liquid easily.

Parameters
Poker 218 Mod
Size: 54.5mm * 88mm * 26mm
Material: Zinc Alloy
Output wattage: 7-228W
Cell type: 2* 18650 batteries
Output mode: KA/TC-SS316/TC-Ni200/TC-Ti/TCR MODE
Max output voltage: 7.5V
Max output current: 50A
Taste mode: NORM/SOFT/HARD/USER
Memory mode: M1/M2/M3
Resistance range: 0.1-0.3ohm KA MODE/ 0.05ohm-1.0ohm for Ti/Ni200SS316/TCR MODE
Temperature range: 100-300℃/200-600℉
USB: 5V/1.5A

Resin Tank
Size: 25.5mm * 45mm
Material: Resin + Brass
Capacity: 4ml/6ml
Coil type: TS-XX Coil 0.18ohm (60-100W)
TS-120X Coil 0.15ohm (70-120W)
Thread: 510 thread

You may also like this vape mod kit with the same features of waterproof, shockproof and dustproof below:
GeekVape Aegis Legend Kit Review

[Vapesourcing]

Latest Snowwolf Mfeng Baby Kit-Compact Version Of Mfeng 200w

Hey guys. Are you looking for some cheap vape mod kits? Snowwolf has just released a cheap one named Mfeng Baby. Just as the name implies, it is the compact version of the Mfeng 200w with comfort and portability being at the forefront of the design. Well, let’s check for more details.

Snowwolf Mfeng Baby Kit consists of the Mfeng Baby Mod and the Mfeng Baby Mod. Inside the mod resides an expansive temperature control suite spanning various wire options like stainless steel, nickel, and titanium. This gives advanced users the ability to dial in the perfect style and method of vaping that is preferred for each individual user. Also, the mod implements a lockable setting to prevent children from accidentally firing or using it. This innovating locking system is great for preventing underage vaping.

Powered by a built-in 2000mah battery, the mod can fire up to 80W, producing tasty flavors and huge clouds at the press of a button. As for the Wolf Mini Tank, it utilizes a superior 5mL maximum juice capacity and is heavily knurled at both ends for easier manipulation of the top-filling system and airflow control ring. Besides the pre-loaded Wolf Mini coils, the tank is also compatible with the Sigelei MS Replacement Coils.

[Parameters]
Snowwolf Mfeng Baby Mod
Size: 68mm * 44mm * 27mm
Material: Stainless Steel
Battery Type: Built-in 2000mAh Battery
Display: 0.91" OLED Display Screen
Wattage Output Range: 10-80W
Voltage Output Range: 1.0-7.5V
Resistance Range: 0.05-3.0ohms
Temperature Range: 100°-300°C / 212°-572°F
Thread: 510

Wolf Mini Tank
Diameter: 25mm
E-Juice Capacity : 2ML/5ML
Material: Stainless Steel+ Pyrex Glass
Coils: 0.25ohm WF Mini Coil - rated for 40-80W
0.28ohm WF-H Mini Coil - rated for 30-60W
Thread: 510

Wanna try it? Buy here: https://vapesourcing.com/snowwolf-mfeng-baby-kit.html

[Vapesourcing]

Guys, here comes the latest RDA atomizer - Capitvape Black Bat RDA, which has the simple deck for building the dual coils easily. This cheap RDA can bring you good flavor and clouds, so do you want to have a try?

Capitvape Black Bat RDA is a 25mm diameter Rebuildable Dripping Atomizer which constructed by high quality Stainless Steel. It’s with the simple deck for easy dual coil building. the Black Bat RDA is designed with special top airflow, and airflow holes in bottom can bring you extremely smooth and tasty vaping. You can accurately adjust the airflow to the tightest condition. What’s more, standard positive pin and raised BF squonk 510 pin are included with deep juice well.

Parameters
Diameter: 25mm
Materials: SS316L
Airflow: Bottom Airflow
Drip Tip: Resin 810 Drip Tip & POM 810 Drip Tip
Adapter: 510 Adapter

This RDA you may like below:
Cheap WISMEC Tobhino RDA

[Vapesourcing]

Vapesourcing New Year Vape Sales Are On!-01/05

Hey guys. 2019 is coming soon! To thank the new and old customers for all the trust and support and welcome the new year, here comes the new year vape sale.

Entrance: https://vapesourcing.com/

Use the code “NewYear” for whole site merchandises 10% OFF! Code expired date: 6th Jan.

[Vapesourcing]

Guys, do you want to order the VOOPOO REX Kit? Now the VOOPOO REX Kit are in stock now. This vape mod kit features S-shaped body, icurve-designed fire button, nnovation GENE.FIT Chip, 80W maximum output, fourth-generation 510 thread, 5ml e-juice capacity and so on.

Order it now: https://vapesourcing.com/voopoo-rex-kit.html.

[Vapesourcing]

As we all know, the Vandy Vape Pulse series vape kits are welcomed by many vapers, and Vandy Vape has also released their newest Vandy Vape Pulse X Squonk Kit Special Edition, which includes a Pulse X mod and a Pulse V2 RDA, but the Vandy Vape Pulse X kit Original Version comes with the Pulse X BF RDA.

Vandy Vape Pulse X Squonk Kit Special Edition is a new edition of Pulse X Squonk Kit. The Pulse X mod utilizes high-tech Vandy Chip to control output precisely and achieve rapid firing. It is powered by a single 18650/20700/21700 battery and supports 90W maximum output power. The replaceable panel with magnetic structure design, easy to replace the battery.

Paired with Pulse V2 RDA, it will work perfectly. The Pulse V2 RDA supports single coil or dual coils building. It also comes with three types of PEI airflow ring, all of them will bring excellent airflow for you. The RDA features top squonk feeding and bottom juice return design, no leakage.

Parameters
Size: 82.6mm * 54.8mm * 27mm
Capacity: 8ml
Maximum Power Output: 90w
Battery: Single 18650 Battery
Display: With Display Screen
Filling: Bottom Filling
Resistance range: 0.05-3.0ohm(VW)/0.05-1.5ohm(TC)
Temperature range: 200-600℉/100-315℃
Thread: 510 Thread

This Vape kit you may also like below:
Vandy Vape Pulse X Review

[Vapesourcing]

OBS KFB Stick Kit Preview-Top Side Fill System Available

Hey guys. Have you ever used the SMOK Stick AIO? If yes, then you may feel familiar with the following AIO vape kit from OBS named KFB, cause they are very similar in appearance.

OBS KFB Kit is an AIO device made of 304 stainless steel. It looks to be a well made device. One of the features from the Crius was the top side fill system. This made filling easy regardless of the bottle being used to fill thanks to a generous filling hole. Working down from the top you have the tank area. This is a 2ml capacity and compliant with the TPD in Europe. Bear in mind this is an AIO (all in one), the tank doesn’t actually separate, nor does it have a spare glass. However, the glass is protected by the body of the tank. This should offer ample protection. Moreover, owing to the premade 0.3ohm single coil, you’ll enjoy a great flavor and vapor production. Below this is the fire button, nice and clicky and lights up. Usual story here of five clicks on five clicks off easy! Finally, at the base of the sleek body is where what I deem to be the best feature of an AIO stick device.

You can unscrew the bottom and place in your own 18650 battery. Heavy vapers might be rather disappointed in stopping using a device they are happy with because of having to let it charge up. So for them having user replaceable batteries is a big positive. Providing you look after this and your batteries, you will have a device that will outlast similar products with a built-in battery as well as being able to take advantage of larger battery capacities. To my mind, it’ll serve vapers who want zero maintenance or for use as a second device very well.

[Parameters]
Size: 21mm x 130mm
Material: 304 stainless steel
Battery type: 1x 18650 Battery (Not included)
Tank capacity: 2ml
Coil: 0.3ohm single coil (35 - 50W)

You may also like this: aspire nautilus aio review

[Vapesourcing]

Is Vaporesso Luxe Nano Kit Better Than Vapor Storm ECO Pro Kit?

Hey guys. Vape devices with lower power but capable of huger and denser clouds are becoming more and more popular. Maybe that’s just what you are looking for. So, today let’s take look at two 80W kits. Just buy from the online vape site if you like.

Firstly is the Kit Luxe Nano Vaporesso. It is a compact device which consists of the Luxe Nano Mod and the SKRR-S Mini Tank. It is powered by a built-in 2500mAh battery, which supports a maximum output of 80W. With the 1.3-inch TFT color screen and vibration-enabled buttons, it providing a wide and edge-to-edge space for easy operation. Adopting the advanced OMNI board 4.0 chipset, it provides multiple protections for safe and stable vaping experience.

The included tank comes with 3.5ml e-juice capacity. The SKRR-S Mini adopts QF meshed coil and QF strips coil. The QF coil’s bullet-shaped inner structure controls air flow to prevent spit back. In addition, the flax fiber with cotton in coils allows for the increased flavor production and increases the lifespan. 6 colors are available.

Then is the Vapor Storm ECO Pro 80W Kit with Hawk Tank. It is a fashionable starter kit which features graffiti design. Powered by a single 18650 battery, the ECO Pro Mod supports 80W maximum output power. It is equipped with 0.91-inch OLED screen to show vital information. It is capable of continuous vape time of 10 seconds. The Hawk Tank, made of 304 stainless steel, is 24mm in diameter. Rock, Cartoon, Blue, Vape on black, and Black are available.

[Vapesourcing]

Hello, guys! You will believe your choice for the Wismec Active Bluetooth Kit 80W after watching this video below. The highlight is that Wismec Active Kit with Amor NSE Tank adopts the innovative Bluetooth technology, so you can listen to music simultaneously while enjoying vaping. It also has the features of waterproof and shockproof. So do you want to have a try right now?

Video on Wismec Active Kit below:

Order one now: https://vapesourcing.com/wismec-active-kit-with-amor-nse-tank.html.

[Vapesourcing]

$14.99 Suorin iShare Single-New Choice For Vaping On The Go!

Hey guys. Have you ever used or been attracted by the Suorin iShare kit? If yes, I’m sure you’ll like the iShare Single I’m gonna share, cause it’s more portable than iShare and the charging is easier.

Suorin iShare Single Kit is a sleek and ergonomic vape pen perfect for vaping on-the-go (just about the size of 2 cigarettes put together). It was designed around the need for those who like to hold their devices between index and middle fingers. Much like the Suorin Air, Drop and the Vagon, it is an AIO device with draw-activated firing pod system.

Powered by a 130mAh built-in battery, it can fire up to 7W output. In view of the 0.9mls e-juice capacity and 2.0 ohms atomizer resistance, I think it’s an ideal device for Nic-Salt or freebase e-liquids. Moreover, it comes with a USB charger base, so the charging will be more convenient. Overall, the iShare Single is a good choice for those who are looking for a discreet device allowing their favorite flavors.

After getting an iShare Single, you may also need the refillable Suorin iShare Replacement Pods. It comes with 0.9mls capacity and 2.0 ohms resistance which are fit for MTL style of the Suorin iShare System.

[Parameters]
Size: 76 x 17 x 9mm
Battery: 130mAh built-in battery
e-Juice Capacity: 0.9ml
Power: 9W
Resistance: 2.0ohm
Charging Time: 60min
Charging Port: Micro USB

[Vapesourcing]

Guys, there are five vape mod kits with extreme water, shock and dust protections from different brands at present in the vape market. Today I will make a comparison between Vandy Vape AP Kit and Teslacigs Poker 218 Kit.

1. Vandy Vape AP Kit

Vandy Vape AP Waterproof Starter Kit features hand friendly size and super light weight, which adopts TPE material, IP66 waterproof extreme water, shock and dust protections. Built-in 900mAh battery generates 20w output, without replacing batteries, it becomes easy and smart.

The included AP MTL Sub Tank adopts MTL coils to provide excellent MTL vaping experience for you. There are multi- directional air holes which can be adjustable, bringing you various vaping experience. Once the juice height is lower than “Min” line, you need to refill the e-juice with the easy top filling system. The AP is designed with detachable structure, you can disassemble it to do maintenance.

Order one now: https://vapesourcing.com/vandy-vape-ap-kit.html.

2. Teslacigs Poker 218 Kit

Teslacigs Poker 218 Vape Kit is consisted of powerful Poker 218 mod and resin tank. The Poker 218 mod is made of Zinc Alloy and comes with classic poker element designed in appearance. Powered by dual 18650 batteries, it can be fired up to 218W maximum output. With big fire button design, it is simple to operate. The mod also supports various modes to achieve different vaping experience. The OLED screen displays data clearly. The resin tank is constructed of environmental resin material and pyrex glass. Comes with convenient top filling design, you just need to pull up the top cap and refill e-liquid easily.

Purchase one now: https://vapesourcing.com/teslacigs-poker-kit.html.

[Vapesourcing]

An Ideal Choice For MTL Vaping-Suorin Edge Pod Kit

Hey guys. Suorin official site will launch two new pod starter kits recently. One has already been introduced in my last post. This time let’s look at the other one named Suorin Edge. From the name and appearance, I guess it’s inspired by the sword. A full Suorin Edge Kit consists of three parts: the battery, the case and the pod cartridge.

The so-called Suorin Edge Case is the main part which connects the battery at the bottom and the pod cartridge on the top. Just like other Suorin items, it has a super slim and portable size for daily carrying. Powered by a built-in 230mAh battery, it’s capable of firing up to 10W. Owing to the draw activated firing design, the only things you need do is to inhale and then enjoy your favourite flavors. Moreover, there is a USB charger base for easy charging, the Type-C charging port will make the device be fully charged in 30 minutes.

As for the Suorin Edge Replacement Pod Cartridge, it features the 1.5ml capacity and leakage-proof design. The improved duck-billed mouthpiece which comes with a lip curve will perfectly fit your mouth and offer better experience.

[Parameters]
Material: Aluminum Alloy+PC
Battery Capacity: 230mAh
Max Output: 10W
Working Voltage: 3.3-4.2V
Charging Current: 500mA
Charging Interface: Type-C
Charging Port: Micro USB
Charging Time: 30mins

[Vapesourcing]

As we all know, the pod system kits are very popular with many vapers, so today I choose the three best cheap vape pod kits in 2018, which are on hot sale in the vape market - Smok Nord, Smok Novo, Lost Vape Orion.

1. Smok Nord Kit

Smok Nord Pod System Kit is a button-triggered pod system device. Powered by a built-in 1100mAh battery with 3ml replacement pod cartridge, it can fire up from 10W to 15W power range to offer you stable and superior vaping. It is equipped with two exclusive coils, Nord mesh 0.6ohm coils and 1.4ohm regular coil, one is perfect to get massive vapor; the other can offer excellent MTL experience. Its size is little bigger than Novo, more comfortable to hold in hand, no hassle of leaking, and the battery indicator will inform you at low voltage, it’s a perfect device for your relax time.

Purchase one now: https://vapesourcing.com/smok-nord-kit.html.

2. Smok Novo Kit

The Smok Novo Pod Vape Kit is launched as a luxuriously designed vape pod system, premiering with an exquisite cobra plated panels for a striking masterpiece with 450mAh rechargeable battery and 2mL refillable pods. Designed with comfortable curvature lines combine with visually impressive design elements, the Novo is destined to stand out when use that maintains a stealth functional vape due to its compact size.

Internally, integrated a 450mAh rechargeable battery within the Novo, with intelligent LED light indicator to provide instant battery life feedback and is conveniently charged via micro USB port. The ergonomically designed refillable pod features a curvature mouthpiece, and an air-drive side airflow system.

Buy one now: https://vapesourcing.com/smok-novo-kit.html

3. Lost Vape Orion Kit

The Lost Vape Orion Vape Starter Kit is the first pod system to utilize a DNA board. The Orion DNA GO not only features safety protections, high efficiency, reliability and durability, but also has highly reputable and precise craftsmanship. The Orion features three power output modes and adjustable airflow control to configure your settings for a satisfying mouth-to-lung or direct-lung vape.

Once you’ve found your perfect setting, replay mode can be activated by simply holding down the adjustment button until the LED indicator turns green. Replay mode is a groundbreaking feature that saves your settings and provides the same level of performance and consistency on all subsequent puffs while preventing dry hits for a truly remarkable vape experience.

Get one now: https://vapesourcing.com/lost-vape-orion-kit.html.

[Vapesourcing]

Guys, today I will recommend you one new pod vape kit - Hugo Vapor Kobra Kit with the unique cobra shaped appearance, and it looks unique and gorgeous. It’s so lightweight to make you easy to carry. Now let’s take a close look at it below.

Inspired of Cobra, the Hugo Vapor Kobra is designed with unique cobra shaped appearance. Working with the built-in 500mAh battery and LED indicator light, the Hugo Vapor Kobra can show battery life clearly and bring you a stable vaping environment. It features draw-activated switch, so you will vape it without any button. The Hugo Vapor pod cartridge comes with refillable 1.8ml juice capacity and 1.5ohm coil resistance. And It features bottom filling system. Just get this device for an on-the-go vape!

Parameters
Size: 108mm * 30mm * 10mm
Battery capacity: 500mAh
Pod capacity: 1.8ml
Coil type: Ceramic coil 1.5ohm
Charging: 5V/500mA
Color: Blue, Grey, Black, Red, White

Order one now: https://vapesourcing.com/hugo-vapor-kobra-kit.html.

You may also like this below:
Cheap Lost Vape Orion

[Vapesourcing]

Guys, good news! Do you pay attention to IJOY Shogun Univ Kit and SMOK Species Kit for a long time? Now it’s the best chance to order the best vape box mod kits because they are at the lowest price.

1. SMOK Species Kit Lowest Price: $53.90

SMOK Species 230W kit combines the vaping and high-tech to bring you wonderful vaping experiences, and this vape kit features a new 1.45’’ high-definition touch screen with upgraded user interface, screen locking button, 230W maximum output with multiple protection, two powerful coils and so on.

Order one now: https://vapesourcing.com/smok-species-kit.html.

2. IJOY Shogun Univ Kit Lowest Price: $57.99

IJOY Shogun Univ Vape Kit with Katana Tank is a perfect combination of power and beauty. This mod kit features exquisite artistry and workmanship, max output of 180W with multiple vape modes, the bright 0.96 inch screen, built-in UNIV chipset, equipped with beautiful double-sided resin panels in a variety of gorgeous color options, compatible with innovative KM1, DM-M2, DM-M3 mesh coil, and ect.

Purchase one now: https://vapesourcing.com/ijoy-shogun-univ-kit.html.