Voltrove 30 v2 RTA Limited Edition Review by SessionDrummer

Having never heard of Voltrove, thankfully @woftam was spamming some pics of this flavor behemoth in the VapeMail thread, and I’m glad he did. With all of the PTMA and shipping bans in flux, once I saw pics of this, I decided to contact Mark at Voltrove and pick up one, JUST in case. You never know, … it’s 2021. Despite the fact that specs on this are few and far between on the interwebs, that’s not going to stop YOU from checking this one out.


Will update after talking with Mark again …

  • Two post deck in the tank and a postless deck in the box. :slight_smile:
  • Wide bore 810 drip tip
  • Bigger and beefier two post deck.
  • Pressure relief system in the threaded top cap. No more seeping when you fill it.
  • Juice flow above the AFC like the 35v2 LE.

A box, just like any other box (sorta).

Well, until you open it, that is.

And behold, Mark thought of pretty much everything including the massive 30 v2 LE with the dual post deck installed, a postless deck, vape band, short tank glass (installed), tall tank glass, allen key, and an entire bag of goodies.

The bag was stuffed soo full, had to dump it out to see what was what. A chimney extension for the tall tank glass, and entire plethora of o-rings of every size conceivable, and plenty of extra grub screws.

Upon initial inspection and cleaning, I couldn’t find ONE fault with any of the parts. The machining (repeating) was spot on accurate, threads buttery smooth, and the fit and finish was first rate.

The main unit, in all it’s Behemoth’ness. I’m waiting to hear back from Mark on some specifics, but this thing is built like a battleship, and I’m almost convinced we’re talking Stainless Steel, and show stopping tinted glass.

Go big, or go home. A nice fattie 810 chuffer, to direct the flavor into your flavor receptor.

Nice o-rings allowed for a smooth and solid drip tip ride.

The top plate (and everywhere else on this unit), had untterly buttery smooth threads, and o-rings a-plenty just like you’d expect from a well thought out device. First rate machining, without exception.

Moving on to the upper, the keyed slots directed correct coil alignmentation. Mucho domed-ness for increased flavor.

From the top, the juice flow ports could not be ignored. Notice the pressure relief valve.

Reversing direction to the bottom cap, even it, exuded Behemoth-ness.

Keyed and ported for all of your flavor enjoyment needs.

Next, we examine the pre-installed dual post velocity styled deck with dual o-rings, and precise machining. You can see how the keyed notches leave the coils directly in proper alignment. Notice the knurling on the juice flow ring, and the massive air flow array, that is duplicated on the opposite side.

Luckily for me, Mark heard that I utterly sucked at making coils, and decided it best, if he included some Mean Drips tri-core, 28/36 N80 6 wrap, 4mm Stags, coming in at just over 0.21 ohms.

Why not right ? This whole setup was top shelf, why not toss some jewelry in for good measure !!

Loading these gems into the deck, and admiring the juice flow ports.

Time out for some spam pics, as this setup was just too damned nice NOT to…

Initial testing, and pulsing on the Asmodus.

Wicking was a no hassle affair, no thinning required.

Tucked the tails leaving a gap in between.

Saucing the sauce.

Break out the fire hose to fill, because it’ll fit. LOL because the Voltrove was almost mocking my smallish needle tipped bottle.

There was a slight overhang on the Asmodus, but still, it couldn’t help but look good.

Even better on the SteamCrave. Behemoth meets the behemoth.


It’s sad that it took PTMA/Shipping Bans to bring this unit into my sights, but I’m damned sure glad it happened, and thanks again out to @woftam. All in, this was a WOA (Work Of Art) device. The smoothness of the threads and machining could not be overstated. Having never owned a Voltrove before, I can’t speak to improvements over previous builds, but I saw rumors of a few upgrades, fixes, etc. With the tri-core coils I needed to throw some extra watts at them to wake them up, and turn on the flavor. With these coils, things started to really wake up at 100w and north, this thing just got STUPID. Out of force of habit with my SteamCraves I turned the juiceflow control off when filling, and then just left it wide open during the entire test. Toyed with the airflow from restricted to wide open, and it clearly could satisfy ANY airflow needs. Slight increase in flavor saturation at more restricted dialings, but not dramatically. The flavor was saturated, accurate, plentiful, and it literally had no care about what flavors I threw in, as it chucked them all my way, and in an almost arrogant, and silly manner !!! For the purposes of this review, I only tested the dual post deck, but will be trying out the postless shortly. Juice and air rings worked great, no leaks, spits, or anything off-putting to be had here.


I know, I know. Why now ?? !!! With all the (US) PTMA, and shipping bans looming, is this something you MIGHT want to pick up ?? Hell to the YES !!! If you’re stockpiled already, then the choice will be yours, but scoring something like this, IN these strange times or who knows WHAT will happen next, just MIGHT make you a happier camper. Not the cheapest, not the smallest, but MAN, what a top rate piece of equipment, that does what it does, and does it good. A flavor chucking behemoth is what it is, and it is not only a joy to build on, but just to use it. The threads/machining reminded me of my first Provari, and how much it stood out from the pack at the time. If you love high end, well machined equipment, this one WILL get it done for you, and it’ll do it with style, and flavor !!!

Sorry that I couldn’t provide more detailed specs, as the info is hard to come by at the moment, and am waiting to hear back from Mark at Voltrove. I will gladly update this review once I get more info.

If you’ve managed to drool your way all the way down here to the bottom, then I salute you. Thanks again out to Mark for providing the tri-cores and the fast shipping.




For more information, join our Voltrove Syndicate group and check the announcements.

In stock:

30v2 LE in black and SS.
35v2 LE postless decks.
35v2 LE spares.


Please contact us to place an order.


Email: Mark@voltrove.com
Voice/text: 707-413-8135

Give our FB page a like!

Join our general FB vape group!
Voltrove Syndicate

Join our modding group!


Great review SD and that Asmodus mod is absolutely beautiful.


How does it do mtl?
That thing looks huge! Great review write up, sir.


Thank you very much @robin.


Thanks very much @delltrapp

Mmmmmm, not really sure this covers that base. Even nearing closed off airflow, it wasn’t entirely close to an MTL. My pics are big (sorry), and for a 30, it wasn’t overbearing.



FFS, break out the Firehose Dman :rofl:
Looks Great, awesome review :call_me_hand:


Thanks a lot @Rocky02852.


Nice review Session Drummer :+1: I may have seen this in a review IIRC, maybe Ohmboy Josh? Not sure but looks like a great dual coil flavor chucker. I’ve been looking for a new dual coil RTA but I’m sure this is out of the price range I was thinking. Definitely would consider otherwise. Lucky dude you are :grinning_face_with_smiling_eyes:


Gudgawd! That beastie belongs in a missle silo in the Great Plains. Sexy as all git out


Thanks very much @muth. Lucky and broke at this point !!!


@Lostmarbles, that’s what I said, the moment I saw @woftam enabler pictures …


Looks like an awesomely well made tank.


30mm! That’s just too big what’s the juice capacity 500mL? :slight_smile:


It’s not as big as you’d think @Guido_Possum. Larger than some, but it is not only a showpiece, and a limited edition, but it’s also a work of art. LOL, I think the cap might be 7ml, and 11ml maybe.


Nice review! I have this tank. You’re spot on with everything. Did you find the o-rings a little stretched out? It’s definitely a sexy looking RTA. The scones glass puts it over the top! I haven’t used the 2 post deck simply because I suck at building on them lol the postless is where I’m most comfortable in building. I used some SFC 4.5mm. Wicking was basically the same as the Aromamizer’s minus thinning. I found 150-180 watts to get good flavor with AF wide open. I really don’t like vaping at that high wattage though. I used one of my custom dna 400’s. Honestly, I like my Aromamizer’s (plus v2 or Ragnar) better. It’s definitely a high quality tank though.