Yep thanks. 5 seconds that’s impressive!
3 Likes
I reckon I should say I have a pretty advanced knowledge of electronics and materials science. Ive also been vaping for 4 years and have full lung function…so anyone thinking of emulating virtually ANYTHING that I do, be warned. Vaping like me is probably not advisable at all. Do what I do at your own risk!
Im not kidding or bragging. These mods will jumpstart your car and LiPo mods are 100% not a joke. One should have no uncertainty when pushing them. Know what you’re doing or dont do it at all.
Consider me a random internet yahoo.
8 Likes
Where’s the fun in that… Go big or go home. Live life on the edge, even if it is the edge of insanity.
I also give really bad advice. Dont listen to me
6 Likes
No such thing as a light weight. Whatever works for you is perfect.
9 Likes
Very similar here.
I run a SS clapton single coil (that’s paralleled with itself, my own idea/design) that always ohms out from .19 to .21 ohms (variance due to leg length once installed).
Power and Temps vary from 36w/400f (on “lighter” flavors) up to about 46w/450f (for “heavier” flavors like custards, butterscotch, etc).
Gets warm quickly, and remains consistent across the 8-10 second pulls that I prefer. “Perfect clouds” that are big enough to be satisfying, without creating my own atmosphere… chuckles
3 Likes
Kudos for mentioning it!
Honestly, I wish more people were familiar with that!
I think it’s probably the second most useful aspect of the site overall (IMO).
There’d likely be a lot less guessing involved for a lot of folks when it came time for new builds if they used/understood that feature!
6 Likes
SS 316L, 0.20-0.30ohms, 45-65watts. I change up and down depending on build, tank, and flavor.
3 Likes
True that. My friend made his own LiPo mod and glowed a Dumptank at over 1kw, just to show it could…
5 Likes
I should mention that some of my tanks / coils just ramp up way too slow at 40W such as the ProCore ProC1, its suggested wattage is 40-80 W but i found my sweet spot at 50 W for that particular coil. and I know there are many other newer coils that fall into the same boat.
BTW i don’t build, I just use factory coils or rebuild factory coils.
3 Likes
I usually enjoy my n80 fused clapton wire @ 6 wraps (3mm id, 28ga*3+36ga). A two coil setup of these usually run around 0.18-0.21 ohm, which I vape at 50ish watt.
I prefer being around the 50w range, but it all depends on what material I’m using. Some have a slower ramp up time, which requires more power to get that instant cloud.
3 Likes
Well tonight I finally got to try high wattage. Dying for a hit i tried to be coy and sneak a quick one from my purse right before dinner at the “Chop House”.
Whipped it out drew big, coughed up a rubber lung , choked for 10 minutes, and my eyes about bugged out when i saw the watts at 250. I think i can still taste it. Nauseating to say the least.
Not the first time i forgot to lock my mod, but sheesh, I got to get better at doing it
13 Likes
6.7W - 8.7W on both the Kayfun Prime/Picos I carry with me (one for fruit, one for tobacco) - 9w is too hot and flavorless, an 18650 lasts nearly 2 days, flavor galore 
7 Likes