Woops. You are the winner. Wow, my Iguana has suffered after prolonged use, maybe I should get one of these …
Good call @woftam.
6 Likes
Ahh, for fucks sake, how am I going to resist it @ $9.99 !!!
6 Likes
I added these to my Elder Dragon 
order. Seems like a bargain for coils I can’t make on my own 
. I’m sure several of these are going to work in the ED
https://www.kangerwholesaleusa.com/geekvape-6-in-1-coil-pack/
Package Contents:
- 2x Alien coil
- 4x Alpha braid coil
- 4x Fused Clapton coil
- 2x Clapton Helix coil
- 2x Clapception coil
- 6x Tidal coil
Coil Features:
- Alien coil:
N80 material
28GA x 3 + 32GA;
Single 0.37ohm / dual 0.18ohm;
3.0 diameter / 5 wraps;
- Alpha Braid Coil:
N80 material
26GA + 40GA x 2 (=) x 16;
Single 0.32ohm / dual 0.16ohm;
3.0 diameter / 6 wraps
- Fused Clapton Coil:
KA1 + N80 material
26GA x 2 (KA1) + 36GA (N80);
Single 0.38ohm / dual 0.19ohm;
3.0 diameter / 6 wraps
- Clapton Helix Coil:
KA1 + N80 material
[28GA (KA1) + 38GA (N80)] x 2 + 26GA (KA1) x 2;
Single 0.36ohm / dual 0.18ohm;
3.0 diameter / 6 wraps
- Clapception Coil:
KA1 material
24GA + (28GA + 36GA);
Single 0.58ohm / dual 0.28ohm;
3.0 diameter / 5 wraps
- Tidal Coil:
KA1 material
30GA x 2 (twisted) + (0.2 x 0.8);
Single 0.52ohm / dual 0.26ohm;
3.0 diameter / 6 wraps
https://www.kangerwholesaleusa.com/coilmaster-skynet-coil-case/
What’s In The Box
- Nifty SkyNet Wheel Case, reusable once coils are finished
- 6 x Fused Claptons / 26AWG*2+39AWG / 3mm / Ni80 / 0.3 +/- 0.05 Ohhm
- 6 x Tortuosity / 23AWG / 3mm / Ni80 / 0.22 +/- 0.05 Ohm
- 6 x Clapton Parallel / 26AWG*2+39+26AWG / 3mm / Ni80 / 0.3 +/- 0.05 Ohm
- 6 x Interlock Clapton / (26+32AWG)+24AWG / 3mm / A1+Ni80 / 0.3 +/- 0.05 Ohm
- 6 x Fused Clapton (Twist) / 28AWG*2+32AWG / 3mm / A1 / 0.45 +/- 0.05 Ohm
- 6 x Flat Clapton / 0.3*0.8mm+32AWG / 3mm / A1 / 0.45 +/- 0.05 Ohm
- 6 x Clapton / 26AWG+32AWG / 2.8mm / A1 / 0.6 +/- 0.05 Ohm
- 6 x Super Tiger Coil / 22AWG+0.4*0.08mm / 3mm / Ni80 + A1 / 0.6 +/- 0.05 Ohm
5 Likes
Wow! I just paid $11.99 for a black Ram.
7 Likes
@Sprkslfly @SessionDrummer 10 points for @woftam lol it’s the stentorian ram, $10 at vapeNW and $11 at the kanger wholesale site, so if your gonna pick up one of those cheap elder dragons then you might as well grab one. The blue is my second ram, I’ve had my first one for 6+ months and my only complaint is the lock mechanism in the button is difficult to turn, but it’s fairly stiff so I rarely lock it anyway. This is the permanent setup, I only take the ammit off to put a new coil on and deep clean it lol.
7 Likes
Here’s a review of the ram for anyone interested, the guy that wrote it likes to hear himself talk though:) Pugsley's 'squonk if you're horny' squonk review of a shit load of squonkers
7 Likes
Love both of these things!! 
7 Likes
Vaping and forum-ing while cooking lol that stuff is better than fresh garlic when you consider the labor exchange rate lol
6 Likes
Has anyone tried running simple round wire in their dragon yet? I might start with a simple parallel coil just to see how it is, the included coils are a bit too low for me to run on a mech
3 Likes
I’m curious to know how it goes. I couldn’t help but to use the second include coil when it was time to change. I’m enjoying it too much 
6 Likes
I use a single 26ga SS316l 6 wrap spaced single. Works a treat.
9 Likes
What diameter do you coil to? What does your coil Ohm out to? I was going to figure it myself but you didn’t provide sufficient input 
3 Likes
Dang, missed that. 2.5mm ID. Ohms at about .45 cold.
4 Likes
Dayam!!! Impossible I say 
6 Likes
I edited it slacker!
4 Likes
Hehehe you edited not but i was gunna say what rda are you using a fatboy
7 Likes
Y’all vicious!
7 Likes
I guess I was a bit quick to poke fun at you, you edited your post 
6 Likes
I think the Elder Dragon should start paying us commission LOL
6 Likes