Decent starting dual coil rta

I’ve watched about 6 or 7 people build and review the creed. Its just the two posts and overlapping legs that are a tiny bit worrying.

5 Likes

Sounds like you need to bite the bullit and buy it. Just follow your favorite reviewer as they build on it and follow them along. Build it in single mode first. It’ll be easier and shouldn’t provide that much frustration off the bat. Pay attention to the wicking method used or you could end up with a mess or choking the juice flow.
And wash it first. You don’t want to taste machine oil.

7 Likes

I’ll do that then. They’re affordable enough I could always grab another rta if i don’t like it. Should I be worried about overlapping legs when I do go to do a dual coil build? Or does it matter as long as its tight enough and they have good contact?

6 Likes

Aliens do have superior intelligence @CosmicTruth.

7 Likes

Good stuff @Lostmarbles.

6 Likes

I might suggest: be sure you have better tools than the little wrench supplied with most RTA’s, and read reviews, watch youtubes and ask around, I’ve spent thousands just a little at a time. For just a little more you can get a zeus, TAF single/dual coil, and it looks like a great deck that even I could build on.
https://www.geekvape.com/atomizer/rta/dtl/420.html

5 Likes

Get the Steamcrave Aromamizer Plus V2 deluxe kit, order directly from Steamcrave and add the velocity deck and the single coil deck. You will have great vape, tons of fun, and you will learn alot. Your world will be new and you will be in love.:heart_eyes:

10 Likes
7 Likes

What Lostmarbles said ^^^^ :100: %

This is what I did for my first RTA, no RDA first & following along with a vid. Easy Peasy!!

Why I waited so long I do not know??
Yes I do, I was scared if f**ing it up.

I built on the (regulated) mod also, no Ohms tester.
Just make sure your mod is turned off while you build :wink:

8 Likes

Geez, you’re no fun at all ! :fire:

5 Likes

very, very simple deck. Two post, one terminal per post. It’s not the easiest deck to build on for beginners because you got to share leads. … Even though you got to share leads, you can get some pretty big coils in there. … You want to use kind of skinny wire coils because you want to make sure you have room to share leads in there … what you do with your other coil is you take it and you also slip that through there and you kind of got a - it’s a little fidgety, that’s why I say this is really not for a beginner to start off with because you kind of got to hold everything in place. I don’t like these decks where both leads share one terminal. They’re definitely not my favorite.

2 Likes

The “Reload” is pretty good and has a post less deck so is really easy to build on, and the taste is pretty damn good for a tank. The “Aromamizer” series I haven’t tried, but I’ve heard nothing but good things about. Once you know how to build, which is not that difficult (check out videos on utube) they are all much of a muchness. A little perseverance goes a long way. The bigger tanks will usually be easier as you have more room to move. Good luck.

4 Likes

Nooooooo, resettle :wink::crazy_face:

The Creed is just soso, not a tank you want to start down the RTA path with. I would recommend the Augvape Intake Dual. Not only is it easy to wick since it is top airflow but the flavor is great and you can build it dual or single coil. If building single coil I suggest a 4mm coil so you have enough wick but it really is an easy tank to build and the flavor is excellent.

I do love the suggestion of the steam crave Aromamizer Plus, probably my favorite RTA or as they call it RDTA of all time. The learning curve is a little higher than my first suggestion of the Intake Dual though, learn to walk before you run as they say.

I want to be clear, the Intake came in 2 versions, the original Intake RTA was a single coil which is also very good. The next version was the Intake Dual and they not only added the option to use 2 coils but also increased the airflow. I just really like this option for first time RTA users as being top airflow allows you get get your wicking game better without dumping your juice all over the place. With RTA’S wicking is very important for overall performance, this should make it easier.

7 Likes

While you’re deciding on an atty that fits your needs you should also (if you haven’t already) start looking at what to do for coils.

You can always buy ‘pre-made’ if you want the convenience or just can’t be bothered making 'em. Personally I never liked the idea of paying someone else for something I could do myself.

Get some wire of your choice and gauge, find a screwdriver with a 2.5mm to 3.0mm shaft and a pair of wire cutters and you’re good to begin learning. This thingamajiggy here is highly recommended though…
coil-master-6-in-1-coiling-jig-kit

9 Likes

Good luck on all your en-devours…

8 Likes

I second this recommendation. I have both the single and dual Intakes and recommend them highly. I haven’t tried the Dual with a single coil build yet, but I plan to, probably the next time I recoil it, just out of curiosity. I have seen posts of people doing that and it looks fairly straightforward. The Dual is the favorite of my dual coil tanks. Usually I vape at low wattages and prefer single coil, but I have been pleased with the performance of the Dual.

Full disclosure: I have been a sucker for Augvape since my first Roxy Merlin. I have eight mod box/tank combos I keep in rotation and four of them are Merlins. The Intake single comes in a close second. The Dual is an easy third. Only one of the other two is dual coil, a Baby Beast with an RBA build deck. It’s okay, but I’d go with the Intake Dual first. Much better flavor. No seepage.

The last is a Vaporesso tank that came a part of a set with the box and uses pre-builts. There’s four coils down in that sucker. I tend to avoid pre-builts since I don’t like the ‘free razor-buy the blades’ marketing strategy. But it is a decent set-up aside from that.

5 Likes

I love all the suggestions. I’m all prepped up on coil work. Unfortunately I was just notified after 4 days that the rtas I ordered are out of stock. Back to square one. Pretty much everywhere is sold out at this point. So I’m not sure where to go from here. I was excited until I saw that email tonight lol.

4 Likes

And as nice as the one is mentioned above im not willing to drop 60 on my first rta. I did like the augvape intake dual but can’t find it in stock anywhere.

2 Likes

At least anywhere in stock that looks legitimate and won’t take 3 months to ship from china.

2 Likes

If it is a US-based vendor, they (may likely) have reduced inventory holdings in anticipation of a May 12, 2020 FDA deadline for unapproved ENDS sales (just a few days ago slid-out to September 9, 2020).

.

Poking around looking for a review, I noticed that the worthy, reliable Eciggity (in Hawaii, USA) has stock (in Black and Gunmetal colors only, no Stainless Steel) for $24.99 (less 10% discount when using TENOFF code). That’s $22.49 total, plus their reasonably priced USPS (First Class or Priority) shipping.

They (Eciggity) still show some stock in your originally mentioned interest (in Gunmetal only, presently).

Their web-sales widget appears to allow one to check stock (by probitively upping the order quantity in one’s shopping-cart). Doing that, they appear to have = > 10 . Their system (seems) representative.

6 Likes