I’m waiting eagerly for that one. Always wanted a Goblin Mini, but that stupid fill screw held me back.
2 Likes
Yup, UD (Youde) is the manufacturer. That is great news! I can’t wait. But I bet the Diablo still has more airflow. Unless the bigger deck takes care of that issue for me. I would like it to have too much airflow and have the lever dialed back a little instead of wishing it went to 12 
1 Like
Never had the original but might try the v2.
1 Like
I am dying to try the real Diablo after trying these tanks. I bet the quality is really good on the Authentic ones. They are very hard to find though. I found their Facebook page. But no links to distributors. I have found a couple sites that sell El Diablo stuff. But they are very pricey. And no 5ml tanks anywhere that I see.
Here is the 2.5ml version. I cannot find the 5ml version.
http://www.2vapedx.com/products/diablo-rta-rebuildable-tank-atomizer-by-el-diablo-philippines?variant=13696965123
Baal V2 RDA
https://www.subtanksupply.com/el-diablo/baal-v2-atty-by-el-diablo.html
Succubus RDA
https://www.subtanksupply.com/succubus-rda-el-diablo-phillippines.html
El Diablo makes some very nice stuff. I have seen some of it first hand. But I never can find the actual item I want when I go to look for it.
Yeah man, I saw something about it last week but I must have been drunk or something. I remember seeing it was top fill and wanted to post something here but then I must have blanked out. Yeah they do have the Mojito figured out down there! 
2 Likes
Dragonsdenvapor.com
Only place I’ve seen that has em in 5ml…and I’ve given it some thought as well. Think ima wait a bit first, see if a clone comes out first. If not, then I’ll be making the purchase on a 5
1 Like
Frustrated… Got my diablo tank and at my wits end tryiing to get it to go
back together properly. I made a dual set of coils with 24g Ti 8 wraps 3mm dia
and it shows at 0.12 ohms . Great… then I put it together, fill the tank and it
shows atomizer low … grrrrrrrrrrr. take it apart and all my juice is wasted
cuz I guess I know not what the heck I’m doing.
I’m gonna try one more time, but then I’ll probably give up and give this thing
away. Dangit. I love the look of this thing.
8 wraps at 3mm would be a tough fit. Do you mean 8.5 wraps? Or 7.5 wraps? Show me a pic of the coil. Because at 6.5 wraps mine was tough to get it to fit, even with the wraps squeezed very close together. I did manage to get a 3.5mm wrap to work, but it is so close to the chimney I bet you could barely get a sheet of paper between the coil and chimney. 3.0mm was still a tad bit difficult, but it will go. You have to keep the coils very close to the posts, and very tightly wrapped. It’s times like these I use a .108" gage pin, which is right at 2.75mm.
2 Likes
Why not just rebuild with 2.5mm ID and make 100% sure the coil doesn’t ground out? As @LordVapor says, 3mm is still tight so make it easier on yourself so at least you’re vaping on it. Depending on the mod, a shorted coil can cause the mod to read “atomizer low”
1 Like
Yeah, don’t give up on it. You just need to get the coil away from the chimney. Squeeze the coils together so there is barely a gap between them. And it sounds like you have at least one, maybe two extra coils in there. My second coil came out to .053ohm. It is perfect on my iPV D3 at 75J. It hit’s like a dream I tell ya. If you can’t get it Alisa, I would be happy to make some coils and send your way. I can build them right on the deck and pull them out so all you have to do is install them and do some fine tuning.
If you look at my first post and look at the coils, you see 7 wires. That means 6.5 wraps. If you see more than that you have too many wraps, which would explain your ohms being higher also. A 2.5mm build should fit in there easily.
Oh, and before you fill, wet the heck out of the coils after installing the chimney. Then assemble the tank, but don’t fill it. Give it a few test fires to make sure everything is working properly before you fill it.
2 Likes
I got it working last night. After pulling it apart, I just adjusted those coils up a bit and squeezed them together better, rewicked it and all is ok now. It works. I’m not ecstatic over the vapor production, but it works and that’s something! 
Thanks for the inspiration guys.
2 Likes
La la la la la la - I am so happy!
1 Like
I went to “like” this comment, then read the edited portion…you referencing the video??
1 Like
Yes. I was referring to the vid. There are way to many gender specific refereces to women’s body parts or women in general in vaping videos coming from men and it needs to just stop. It’s disrespectful to women. Vaping or vaping parts can’t be compared to a woman’s body. Rip Trippers started the mess and the others followed suit. What these guys don’t realize is that their daughters are going to someday watch these vids and see daddy talking about women in a very objectifying way. It needs to stop.
1 Like
It would be nice to see some women reviewers. I also agree with you. But this is the internet where anyone can write down or video tape anything they want. I wouldn’t get riled up about any particular idiot’s ranting. Daughter’s, wives, mothers. . .I sure wouldn’t want mine to see me behaving that way, but getting upset about it us not terribly productive IMO as you have zero power to change the behavior of even a single moron. I’d love to see your energy channeled into your own reviews or maybe collecting reviews that meet your standards and then re-posting them though.
I cant even get through one of that idiots reviews, and I am interested in that tank. . .but I definitely do not care what beer he is drinking. Perhaps he just has a very limited vocabulary. In any event, I watched a few minutes(it was all I could take) and will look elsewhere.
2 Likes
Thanx for your reply. I’ve been thinking about doing a review. You seem like a strong, smart, sensitive, man that I would like to see a review from as well.
I gotta say, that last part made me laugh out loud, and I NEVER do that, lol…
2 Likes
Here ya go
2 Likes
Ever notice how television commercials make men out to be complete idiots? It seems most of the time when a commercial has men in a social situation with women, they are portrayed a clumsy, ignorant, lazy, submissive, or a combination of these things. But where’s our advocate?
Back to the topic. @LordVapor how is this tank holding up for you? Are you still enjoying it and does it get a lot of use? I’m thinking of getting a couple new mods - maybe the Cuboid - and would probably get new toppers for them. Lemme know.
2 Likes
Both of these Diablos see daily use. One goes to work with me daily and my TFV4 sits on my desk looking at me like a lonely puppy. I wish they had just a tad more air-flow. But it’s not enough of a problem that I don’t use them more than any other tank now. And if it were it would be easy to open that up a bit with a light bit of grinding or machining.
This is sad to think that a tank that cost $12.00 has taken the lead of all the tanks I own. It may not be for everyone. But it is the exact tank I would want if I had to buy my first tank all over again. @SthrnMixer, I really think you will work your magic with this tank and fall in love with it. I have rebuilt both of them twice. My “mostly silver” tank somehow came out to .1 ohm the second time I built it. I must not have gotten everything as tight on the wraps or something… But it still hits great and has great flavor.
The flavor is amazing. Like I said, they remind me of a beefed up Goblin Mini. They have never leaked. Not a single drop, except for once when I started filling one and started watching a video @daath posted and forgot to put the top on. It was running down my elbow before I noticed it.
Vapor production for me is great. I think having the two tanks showed me the slight difference in each build and I was able to capitalize on that and make fine adjustments to my coils and wicks to get the most out of them. I will be posting some more info on this some day soon.
2 Likes