what size Phillips driver are you using?
do you have a supplier for replacement screws?
I get the correct size replacement screws from ebay
3 Likes
I believe mine are coming tonight. Don’t know if I’ll have time to play with them yet.
2 Likes
It looks like the two middle sizes are the closest to baby beast sized mesh coils. Ones woven mesh, the other is one of those strips with holes punched in it. The sizes are 7x21mm, and 8x22mm. The larger size might be for Prince tank sized coils or larger tanks. The smallest size will have a smaller inner diameter. I’ve used them to rebuild Nunchaku tank coils.
4 Likes
I was hoping one or two would fit in the SMRT coil heads for the PnP and V8 Baby.
2 Likes
Got the SMRT and RBA kits today. Upon initial inspection, it looks like the SMRT will fit my Hellbeast Sub-Ohm. That makes my day, 'cuz I love that thing. Hope fully, I’ll get a chance to try it tonight.
4 Likes
I just used the one that came in the box. It’s not quite Barbi sized but it’s a small one. I never even thought to try one from my nice tool kit. The size of the screw is really small. I don’t have any on hand.
3 Likes
these are the two sizes i purchased on ebay. they work in various atties.
M2.5 x 3mm (0.45mm), Set Screws Flat Point Grub, A2 18-8 Stainless Steel
M3 x 3mm (0.5mm), Set Screws Flat Point Grub, 45H Steel, Black Oxide
if you need Phillips head exclusively, I’m sure you can find them too.
also, i purchased quality tools when i stripped the screw head on my very first atty. 
2 Likes
They’re smaller than those. I’m guessing M 1.5 and maybe and 2mm. I got tons of screws a couple of months ago but none are small enough for this. I usually hate flat head screws but even those would’ve been better for this. Again, they’re just so damned small.
4 Likes
3 Likes
just remembered that i had to get a #00 phillips for an eleaf lemo 2. i’d better check the size against the screws i already have.
2 Likes
I just measured the SMRT PnP mesh and it’s 7mm x 14mm. That’s a considerably smaller diameter than what you say the Baby Beast is!
2 Likes
When you get the time see how it fits the Hellbeast. If it fits in the Hellbeast it will fit the Cerberus. Would love to have unlimited supply of Rebuildable coils.
Keep us advised.
3 Likes
Just coiled and wicked the SMRT rba and it fits the Hellbeast perfectly. No leaks from the top or bottom of the glass. I used the “Extreme” mesh with the cotton strip included with the kit and it seems to be working well. There is a muted flavoring thing going on with it but may be the cotton needed to be broken in (I’ve only taken about 10 puffs from it). Let’s see how it does after a full tank. I’ll try it on the Cerebus next.
4 Likes
The mesh coil head fits in the Hellbeast, too? 
Or are you talking about two different things?
2 Likes
Nevermind anything I’ve said about the SMRT mesh RBA. I was so tired, that I didn’t notice that I put in an old used Hellbeast coil head and NOT the SMRT RBA. Idiot! I’m going to wait until I get some rest. Lack of sleep and extreme heat are taking it’s toll on my inability to break from stupidity.
4 Likes
Okay, I was confused because we’ve been discussing two different products on the thread, the nexMINI RBA which we’ve ascertained will fit the Baby Beast and Big Baby. Then there are the SMRT mesh rebuildable coil heads for the PnP, V8 Baby et al. I’ve been using the PnP sized mesh (smaller ID) in a PnP tank and I’m getting pretty good flavor. I wonder what the issue could be? I assume you’re using the V8 Baby mesh coils?
Oh geez, I just saw your new post!
3 Likes
@Lostmarbles the other day I was getting ready to try a new recipe. I was all excited, cleaned and rewicked my coil, then I picked up my old ADV juice, primed the coil, filled the tank and was like WTF is wrong with me!???
4 Likes
Dayum! Everyone is out of stock on SMRT products. I was able to get a few things at FT then found some more at Healthcabin figuring I would split the order, one here one there, etc. I get ready to pay at HC and they won’t accept my card. They said on the site they are only accepting the following: MC, debit MC and JBS. Luckily I had one of them, a debit MC, although I don’t like using debit cards online. Didn’t matter…rejected. WTF, now I have to go back to FT and see if I can add to the order.
3 Likes
Okay, I went back to FT and put in a request for an order change. They should be able to work it out since 2 items don’t ship for 7 days.
Vapecrawler only showed 3 vendors carrying the SMRT V8 stuff. Not that they show everyone but just saying. You know how it is.
3 Likes
Element Vape has the SMRT V8 coil kits in stock
5 Likes