Rx update 3.0 with TCR !
Lets give it a test
1 Like
Just finished mine, now to playâŚ
1 Like
dont forget the wattage will be set to 200watts after an update. Watch out for those dry hitsâŚ
i love how the new menu worksâŚlove to no longer have to press multiple 3x to change it from TI to NI or SS or VW
havent got time to play around with the TCR yetâŚmaybe tonight
1 Like
Do you know how to set TCR. Iâm not seeing itâŚ
btwâŚordered a sleeve and it turned out to be nicer and better quality then i expected.
click for pics
1 Like
i havent tested anything yet but this is what my collegue sent me in a msg:
To enter TCM M1/2/3 programming 5 clicks to power off device then fire and plus for a few seconds till the menu pops up.
SS mode should be configured for SS316L now also
2 Likes
Cool I sure hope this is the fix for those having issues.
Going to do the update now, will check back after I get to play a bit.
wish it would fix mine, but mine is a hardware issue⌠still no response from wismec 11 days and 6 emails inâŚ
Bud I donât own one but on the eVic VTC mini you have to have the mod off. Then hold fire and + to set TCR. See if that works.
1 Like
@SthrnMixer got it.
5 cliks of fire button to turn off press and hold fire button and up button
Up /Down button to select M1/M2/M3
Click fire button to move to setting mode
Up/Down button to set value
After setting it wait for screen to go blank then 5 clicks of fire button to turn on
3 clicks of fire button to go to set mode and use up/down button to select which mode
Press fire button to set
Vape away
3 Likes
Sounds like a video game cheat code.
5 Likes
so what does M1 M2 M3 do,???
1 Like
That gives you 3 locations to put in customer TCRs
Here is the chart I posted in the evic mini thread
Here is an example of how you use this
Stainless Steel
80 to 200 will be entered like this 0080 to 0200
2 Likes
By setting the TCR yourself you have much better control of the vape experience
Example
I set my Ti wire TCR to 380 manually and it would seem the manufacturer sets it around 360
My setting allows me to get the vape I like at a temperature setting 30 to 40 dgrees cooler on the screen setting but the vape itself is warmer and smoother than if I use the manufacturerâs setting. Hope that helps
2 Likes
now to figure out what to set the modes to the best vape. Love to play lol
Mine is now set for Ti at 350 TCR. 42 watts and 500 degrees. Iâm happy. Will play more as time permits though. After all, we all want perfection, donât weâŚ
2 Likes
mine is set tcr 180 420F 50watts. working awesom
1 Like
Set M1 at 350, M2 at 375, M3 at 400. For Ti of course. Try them all and choose the closest, then adjust. Something similiar for other wiresâŚ
3 Likes