USA United Squonkers of America

Presentation adds more then i thought it would for me in vape gear. once you get them you might find even w/ a matchy matchy plan ahead of time that u prefer the look of an rda on another device. you also might prefer the capacity of one combo better too, finding a happy vaping wattage to match when battery and bottle deplete at the same time is nice. You might find one more forgiving on overdripping or squonking and one might do better at one or the other and might dedicate one for outta the house.

4 Likes

Whatever rda you use the highest ohm coil with belongs on the pulse mech mod. It’s not a bad little mod but it has some voltage drop due to the killswitch, and it’s really bad running below 0.3 ohm, but I don’t even notice it running an ammit mtl or berserker around 0.7-0.9 ohm

4 Likes

Do you have any squonk refill bottles?
Vapor Range has dual coil Galatek ($35) for $8 shipped.

2 Likes

Not sure if you have this one personally… But several folks above (in this thread) said that it was pretty disappointing (and that’s being kind by at least one account). I know it’s part of why I passed on it…

3 Likes

I do have this…and use 4 of them (at least) every day.
Love the flavor, and the easy build.
What is disappointing about them, I don’t see it in my use…
Do you remember any post #'s so I can go have a look-see?


Edit: I saw this one from @Kinnikinnick (#1354?)
"On a side note about another asMODus RDA… the Galatek. :poop: What a waste of metal this thing was! "

5 Likes

Iirc most the issues were around how easy it was to oversquonk with it

3 Likes

Sorry for not replying sooner! Obviously I got sidetracked and then forgot. :man_facepalming:

I typically use 80+VG. So I doubt it’s that.
My profile leaked between the o-rings and the outer cap (shell). Didn’t matter if it was the ones it shipped with (pre-installed), or the included replacements.

At this point I’m chalking it up to a factory defect. As I haven’t really seen (m)any others complaining about the same manner of leaking. :man_shrugging:

So, now that you’ve got a little more time with the two, I’m curious to how things shaping up currently?

2 Likes

Fair enough!
Aside from Jim’s… I can’t seem to find them quick and easy via search ATM. But I remember reading several comments about it, and I was pretty certain they were here (for the most part). I read several hundred posts over a few days in trying to catch up on this thread though, so I could’ve been confused with what I read where. My apologies if that turns out to be the case.

3 Likes

Yeah, good points @worm1. Thanks brother :+1:

Sort of what I was thinking @Fishaddict420. I very rarely go under 0.4 ohms anyway but have been known to go lower but it’s a (very) rare occurrence. It’s an old habit of mine from when I first started but I usually hover around 0.50 ohms so I can try and conserve battery life a little. It might be the “tight-ass” in me shining through :grinning:

Do I have any refill bottles @ozo? No worries there mate. Got myself 5 x 30ml sitting in my “sqounk goodies box” (aka shoebox) amongst other bits’n’pieces. As far as RDAs go, I’m a single coil sort of guy. Use less juice and less power. See? Told you it might be the “tight-ass” shining through (ha-ha).

Anyways, thanks for the replies guys, appreciate it. I’m off to bed, gotta get up nice and early (4.15am) for work tomorrow. Have a good one. Cheers…

4 Likes

They do squonk easily, which is a plus that I like…especially with the older
non-silicone squonk bottles [like in the Kanger squonks].

Different mods and different bottles do not squonk the same, even
though they each have silicone bottles.
I use an array of devices, and even with identical mods, yet using different
brands of silicone bottles, they require different pressure(s) to squonk.
I mix/match many mods/attys [all squonkers] and may even change it up
between vapes on occasion, or when I remove the atty to fill the bottle.

I also can over-squonk any and all of them if I don’t pay attention, eh?
It would be simple and easy to avoid…if I only used a couple of mods
that wore the same RDA all the time.

I keep 8 or 10 ready-to-go on my desk constantly, and others sitting about
the house [living room, bedroom, bathroom, kitchen, etc.]

5 Likes

What brand(s) do you have/like ?
AFAIK I have every brand made, and my fave’s are the Vandy Vape brand.

7 Likes

Sorry I misread lol it was late, I was talking about the rda lol

3 Likes

Nice collection =)…

3 Likes

Yeah… I was a bit harsh about the Galatek, huh? :confused: I don’t hold atomizers that easily jizz juice all over the place in the highest regard. Sure, there’s some common sense involved when using any atomizer, be it RDA or RTA; don’t repeat the mistake of doing whatever it was that caused the gush in the first place. However, there are certain atomizers which are build for failure in the leaky department.

Personally, I don’t like to experience the sensation of being constantly vigilant for leaks with an atomizer. Others may not mind it so much, if the atomizer provides them with an extremely pleasurable vaping experience; Vapers choice and preference. My choice and preference: I can’t abide babysitting an atomizer for leaks… no matter what.

6 Likes

Are you using cotton or rayon just curious?

2 Likes

I use both.
It just depends what I grab first, what I am in process with at my desk, etc.
Cotton is under desk on a shelf in a tupperware, rayon is in the drawer under
the Dillon 550B just to my right.
No rhyme or reason for either choice really…

2 Likes

Nah…you only conveyed your preference from your experience.
Thank God we are not all cookie-cutter alike, eh?
I may love a santoku, you a nakiri, yet we both deliver a nice charcuterie board.

5 Likes

Them’s some nice looking bottles @ozo. I just got some “no-names” from FT. The Vandy Vape ones were $7.67 each and the Lost Vape ones were $8.27 each so I just opted to get these cheaper ones for $4.77 each. Not that I know anything about these yet but they look OK and have a pretty good rating score so thought I’d give them a go and see how they perform. No biggie though as at that price, I can afford to lose a little cash. If anyone’s interested, these are the ones I got:

Cheers…

5 Likes

I go full Samurai! :sunglasses:

image

7 Likes

Nobody does it like the Samurai delicatessen!

5 Likes