Using Premix 65/35 VG/PG

[Brett11]

Hi all
I have been mixing for years now and finally decided to just have 1 bottle of VG/PG Premix that I made at 65/35 with no nicotine. All my recipes have the vg/pg ratio’s separated with there proper amounts. My question is, do I just add the two amounts on the recipe together and that’s what i use, or can I edit my recipe so that it only shows one amount of the 65/35 premix.
Thank you

[Sevencasper]

Hi Brett,

There are a couple of ways you could do this:

Enter 0 Nic and Max VG - you could add a comment in the notes section that your base is 35/65.

Or

You can select the “use vape ready nicotine base” option in the recipe making process but unfortunately there is a glitch in the software that will show your recipe has an error.
You can take a screenshot of the recipe at this stage but it will not let you save the recipe because of the error.

This is what you enter:

This is what happens when you save:

There are a couple of other suggestions in these threads also:

Recipe calculator no good for use with pre mix pg/vg/nic base

Tho it has all been mentioned above, no it doesnt save but for the sake of sharing your mixes, just enter the base % that you have. The base %s are usually adapted anyway, all anyone needs to recreate a mix is the % of each flavoring added. i have used a premixed and as mentioned, the best way is to click max vg box, 0 nic and treat your base as if it was vg. More then likely since most flavoring are pg, you will just end up w/ slightly higher % of pg in the mix. Gl to u!

Calculator Help!

Recently with all the flavoring ban on Michigan (even though flour now you can buy flavored juice again) I decided I should learn to make my own juice. I use a vape-ready nicotine base to keep things double since I just started making my own. I love the fact that this site has that option. However, whenever I try to create a recipe with that option clicked an error always comes up. I’ve tried changing the numbers but nothing works. In the red box above it says im missing The target strength fie…

Creating a recipe glitch

Hello all, just getting started into mixing and I’ve run into an issue when trying to create a recipe with the calculator. I bought a bottle of premixed 80/20 with 3mg nicotine and I am clearly not entering something correctly. Every time I try to save the recipe I get errors and it erases all the fields I entered. After doing this 10 times, it starting to get frustrating! [image] image|281x499 Any advice would be helpful

Hope this is of some help and not too confusing.

[Brett11]

Thank you so much. Good info!

[Brett11]

Thank you so much. Good info! Sorry, posted in the wrong area.

[Sevencasper]

No worries